From: andrew@lunn.ch (Andrew Lunn) Date: Wed, 4 Dec 2013 15:17:21 +0100 Subject: [PATCH v4 4/4] mvebu: Dove: Add clocks and DFS interrupt to cpu node in DT. In-Reply-To: <1386166641-7567-1-git-send-email-andrew@lunn.ch> References: <1386166641-7567-1-git-send-email-andrew@lunn.ch> Message-ID: <1386166641-7567-5-git-send-email-andrew@lunn.ch> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The dove-cpufreq driver needs access to the DDR and CPU clock. There is also an interrupt generated when the DFS hardware completes a change of frequencey. Add these to the cpu node in DT. Signed-off-by: Andrew Lunn Tested-by: Sebastian Hesselbarth --- arch/arm/boot/dts/dove.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 4c8028513133..3842ba02dddf 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -22,6 +22,10 @@ device_type = "cpu"; next-level-cache = <&l2>; reg = <0>; + clocks = <&core_clk 1>, <&core_clk 3>; + clock-names = "cpu_clk", "ddrclk"; + interrupt-parent = <&pmu_intc>; + interrupts = <0>; }; }; -- 1.8.5