From: nm@ti.com (Nishanth Menon) Date: Wed, 11 Dec 2013 04:21:43 -0600 Subject: [PATCH 0/2] net: smc91x: add DT flags for legacy platforms Message-ID: <1386757305-12545-1-git-send-email-nm@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi, SMC91x driver has been converted to device tree, however users of older lan91c94 based platform need description provided previously by platform_data. Without this, ethernet fails to function on these platforms. For example, on SDP2430: Before: http://pastebin.mozilla.org/3753793 After: http://pastebin.mozilla.org/3753792 Nishanth Menon (2): net: smc91x: Read hardware behavior flags from device tree ARM: dts: omap2430-sdp: add flags for ethernet functionality Documentation/devicetree/bindings/net/smsc91x.txt | 45 +++++++++ arch/arm/boot/dts/omap2430-sdp.dts | 5 + drivers/net/ethernet/smsc/smc91x.c | 106 ++++++++++++++++++++- 3 files changed, 155 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/net/smsc91x.txt Regards, Nishanth Menon -- 1.7.9.5