From: Hannes Reinecke Subject: [PATCH 0/2] loop: support different blocksizes Date: Thu, 20 Feb 2014 14:48:49 +0100 Message-ID: <1392904131-71320-1-git-send-email-hare@suse.de> Cc: linux-kernel@vger.kernel.org, linux-fsdevel@vger.kernel.org, Alexander Graf , Jens Axboe , Hannes Reinecke To: Theodore Tso Return-path: Sender: linux-kernel-owner@vger.kernel.org List-Id: linux-fsdevel.vger.kernel.org Hi all, the loop device already contains rudimentary support for blocksizes other than 512 bytes, so this patchset enables the loop device to use a different blocksize. The new module parameter 'lbs' specify the blocksize to use, or '0' to use the blocksize of the underlying device (which defaults to PAGE_SIZE for files). Eventually it might be useful to select the blocksize per device, but the interface for that will need to be discussed. Hannes Reinecke (2): loop: Display correct physical blocksize loop: Add module parameter 'lbs' to set logical blocksize drivers/block/loop.c | 65 ++++++++++++++++++++++++++++++++++++++-------------- drivers/block/loop.h | 1 + 2 files changed, 49 insertions(+), 17 deletions(-) -- 1.7.12.4