From: Wei Ni Date: Tue, 25 Feb 2014 06:21:41 +0000 Subject: [lm-sensors] [PATCH 2/2] hwmon: lm90: expose to thermal fw via DT nodes Message-Id: <1393309301-28337-3-git-send-email-wni@nvidia.com> List-Id: References: <1393309301-28337-1-git-send-email-wni@nvidia.com> In-Reply-To: <1393309301-28337-1-git-send-email-wni@nvidia.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: khali@linux-fr.org, linux@roeck-us.net Cc: lm-sensors@lm-sensors.org, linux-kernel@vger.kernel.org, Wei Ni This patch adds to lm90 temperature sensor the possibility to expose itself as thermal zone device, registered on the thermal framework. The thermal zone is built only if a device tree node describing a thermal zone for this sensor is present inside the lm90 DT node. Otherwise, the driver behavior will be the same. Signed-off-by: Wei Ni --- drivers/hwmon/lm90.c | 58 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 58 insertions(+) diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index fb9e224..8f52269 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -96,6 +96,8 @@ #include #include #include +#include +#include /* * Addresses to scan @@ -119,6 +121,13 @@ static const unsigned short normal_i2c[] = { enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680, max6646, w83l771, max6696, sa56004, g781, tmp451 }; +enum sensor_id { + LOCAL = 0, + REMOTE, + REMOTE2, + SENSOR_ID_END, +}; + /* * The LM90 registers */ @@ -368,6 +377,7 @@ struct lm90_data { struct i2c_client *client; struct device *hwmon_dev; const struct attribute_group *groups[6]; + struct thermal_zone_device *tz[SENSOR_ID_END]; struct mutex update_lock; struct regulator *regulator; char valid; /* zero until following fields are valid */ @@ -880,6 +890,24 @@ static ssize_t show_temp11(struct device *dev, struct device_attribute *devattr, return sprintf(buf, "%d\n", read_temp11(dev, attr->index)); } +static int lm90_read_local_temp(void *dev, long *temp) +{ + *temp = read_temp11(dev, LOCAL_TEMP); + return 0; +} + +static int lm90_read_remote_temp(void *dev, long *temp) +{ + *temp = read_temp11(dev, REMOTE_TEMP); + return 0; +} + +static int lm90_read_remote2_temp(void *dev, long *temp) +{ + *temp = read_temp11(dev, REMOTE2_TEMP); + return 0; +} + static int write_temp11(struct device *dev, int nr, int index, long val) { struct { @@ -1659,6 +1687,33 @@ static int lm90_probe(struct i2c_client *client, } } + data->tz[LOCAL] = thermal_zone_of_sensor_register(&client->dev, + LOCAL, + &client->dev, + lm90_read_local_temp, + NULL); + if (IS_ERR(data->tz[LOCAL])) + data->tz[LOCAL] = NULL; + + data->tz[REMOTE] = thermal_zone_of_sensor_register(&client->dev, + REMOTE, + &client->dev, + lm90_read_remote_temp, + NULL); + if (IS_ERR(data->tz[REMOTE])) + data->tz[REMOTE] = NULL; + + if (data->flags & LM90_HAVE_TEMP3) { + data->tz[REMOTE2] = thermal_zone_of_sensor_register( + &client->dev, + REMOTE2, + &client->dev, + lm90_read_remote2_temp, + NULL); + if (IS_ERR(data->tz[REMOTE2])) + data->tz[REMOTE2] = NULL; + } + return 0; exit_unregister: @@ -1674,8 +1729,11 @@ exit_restore: static int lm90_remove(struct i2c_client *client) { + int i; struct lm90_data *data = i2c_get_clientdata(client); + for (i = 0; i < SENSOR_ID_END; i++) + thermal_zone_of_sensor_unregister(&client->dev, data->tz[i]); hwmon_device_unregister(data->hwmon_dev); device_remove_file(&client->dev, &dev_attr_pec); lm90_restore_conf(client, data); -- 1.7.9.5 _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors