From: Oliver Hartkopp Subject: [PATCH v5 0/6] Add CAN FD infrastructure for CAN driver Date: Wed, 26 Feb 2014 23:10:56 +0100 Message-ID: <1393452662-3154-1-git-send-email-socketcan@hartkopp.net> Return-path: Received: from mo4-p00-ob.smtp.rzone.de ([81.169.146.216]:26084 "EHLO mo4-p00-ob.smtp.rzone.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752299AbaBZWL1 (ORCPT ); Wed, 26 Feb 2014 17:11:27 -0500 Sender: linux-can-owner@vger.kernel.org List-ID: To: linux-can@vger.kernel.org Cc: Oliver Hartkopp This is the patch series to extend the CAN driver infrastructure with CAN FD. Changes v4 -> v5: Introduced a new helper function candev_has_bitrate() in patch 2 which leads to simple changes in the following patches using this helper now. Regards, Oliver *** BLURB HERE *** Oliver Hartkopp (6): can: preserve skbuff protocol in can_put_echo_skb can: only send bitrate data via netlink when available can: provide a separate bittiming_const parameter to bittiming functions can: introduce the data bitrate configuration for CAN FD can: allow to change the device mtu for CAN FD capable devices can: add bittiming check at interface open for CAN FD drivers/net/can/dev.c | 146 +++++++++++++++++++++++++++++++++------ include/linux/can/dev.h | 7 +- include/uapi/linux/can/netlink.h | 3 + 3 files changed, 134 insertions(+), 22 deletions(-) -- 1.9.0