From: Benoit Cousson Date: Wed, 26 Feb 2014 23:09:46 +0000 Subject: [RFC 0/4] ARM: shmobile: Add CPUFreq support for r8a7790-lager platform Message-Id: <1393456190-7870-1-git-send-email-bcousson@baylibre.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-sh@vger.kernel.org Hi Magnus, This not-yet-ready-to-merge series is adding CPUFreq support to Lager board. Due to the missing data for the OPP voltage values, a safe 1.0v value is used for all OPPs. At least this series can be used by Laurent to test the z-clock CCF node and the KICK bit fix I've just sent. Bottom-line, no real DVFS so far, but just DFS :-) Please note that this series is safe even in the case of Cortex A7 boot since the cpufreq-cpu0 driver is using the physical CPU@0 device node. In the case of CA7 boot, the first cpu will be the CPU@100, and thus the driver will fail at probe time due to the lack of CPU@0. Regards, Benoit Benoit Cousson (4): ARM: dts: r8a7790-lager: Add VDD MPU regulator for DVFS ARM: dts: r8a7790-lager: Add DVFS parameters into cpu0 node for r8a7790 ARM: shmobile: lager-reference: Add cpufreq-cpu0 device for CPUFreq support ARM: shmobile: Make r8a77900 CPUFreq capable arch/arm/boot/dts/r8a7790-lager.dts | 25 +++++++++++++++++++++++++ arch/arm/boot/dts/r8a7790.dtsi | 11 +++++++++++ arch/arm/mach-shmobile/Kconfig | 2 ++ arch/arm/mach-shmobile/board-lager-reference.c | 3 +++ 4 files changed, 41 insertions(+) -- 1.8.3.2