From: Imre Deak Subject: [PATCH v2 05/21] drm/i915: add init power domain to always-on power wells Date: Tue, 4 Mar 2014 19:22:54 +0200 Message-ID: <1393953790-20733-6-git-send-email-imre.deak@intel.com> References: <1393953790-20733-1-git-send-email-imre.deak@intel.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mga11.intel.com (mga11.intel.com [192.55.52.93]) by gabe.freedesktop.org (Postfix) with ESMTP id 2C74E1057F9 for ; Tue, 4 Mar 2014 09:23:24 -0800 (PST) In-Reply-To: <1393953790-20733-1-git-send-email-imre.deak@intel.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: intel-gfx-bounces@lists.freedesktop.org Errors-To: intel-gfx-bounces@lists.freedesktop.org To: intel-gfx@lists.freedesktop.org List-Id: intel-gfx@lists.freedesktop.org Whenever we request a power domain it has to guarantee that all HW resources are enabled that are needed to access a HW register associated with that power domain. In case a register is on an always-on power well this won't result in turning on a power well, but it may require enabling some other HW resource. One such resource is the HSW/BDW device D0 state that is required for all register accesses and thus for all power wells/power domains. So far the init power domain (guaranteeing access to all HW registers) was part of the default i9xx always-on power well, but not the HSW/BDW always-on power wells. Add the domain to the latter power wells too. Atm, all the always-on power wells have noop handlers, so this doesn't change the functionality. v2: - clarify semantics of always-on power wells (Paulo) Signed-off-by: Imre Deak --- drivers/gpu/drm/i915/intel_pm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index ebbd0ed..9a608f1 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -5388,7 +5388,8 @@ EXPORT_SYMBOL_GPL(i915_release_power_well); #define HSW_ALWAYS_ON_POWER_DOMAINS ( \ BIT(POWER_DOMAIN_PIPE_A) | \ - BIT(POWER_DOMAIN_TRANSCODER_EDP)) + BIT(POWER_DOMAIN_TRANSCODER_EDP) | \ + BIT(POWER_DOMAIN_INIT)) #define HSW_DISPLAY_POWER_DOMAINS ( \ (POWER_DOMAIN_MASK & ~HSW_ALWAYS_ON_POWER_DOMAINS) | \ BIT(POWER_DOMAIN_INIT)) -- 1.8.4