From: Felipe Balbi Subject: [PATCH 3/3] usb: phy: msm: enable build on other architectures Date: Wed, 30 Apr 2014 11:38:36 -0500 Message-ID: <1398875916-14461-3-git-send-email-balbi@ti.com> References: <1398875916-14461-1-git-send-email-balbi@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: Received: from bear.ext.ti.com ([192.94.94.41]:35201 "EHLO bear.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1422650AbaD3Qiv (ORCPT ); Wed, 30 Apr 2014 12:38:51 -0400 In-Reply-To: <1398875916-14461-1-git-send-email-balbi@ti.com> Sender: linux-arm-msm-owner@vger.kernel.org List-Id: linux-arm-msm@vger.kernel.org To: iivanov@mm-sol.com Cc: tim.bird@sonymobile.com, linux-arm-msm@vger.kernel.org, Linux USB Mailing List , Felipe Balbi By adding COMPILE_TEST to the list of dependencies we can build test this driver on all other architectures which is very valuable for maintainers applying patches and to find silly mistakes during development. Signed-off-by: Felipe Balbi --- drivers/usb/phy/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 0c668a3..fbbced8 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -172,7 +172,7 @@ config USB_ISP1301 config USB_MSM_OTG tristate "Qualcomm on-chip USB OTG controller support" - depends on (USB || USB_GADGET) && (ARCH_MSM || ARCH_QCOM) + depends on (USB || USB_GADGET) && (ARCH_MSM || ARCH_QCOM || COMPILE_TEST) select USB_PHY help Enable this to support the USB OTG transceiver on Qualcomm chips. It -- 2.0.0.rc1