From: Shobhit Kumar Subject: [PATCH 2/2] drm/i915: Update the DSI ULPS entry/exit sequence Date: Thu, 3 Jul 2014 16:35:41 +0530 Message-ID: <1404385541-15075-2-git-send-email-shobhit.kumar@intel.com> References: <1404385541-15075-1-git-send-email-shobhit.kumar@intel.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mga02.intel.com (mga02.intel.com [134.134.136.20]) by gabe.freedesktop.org (Postfix) with ESMTP id BB13B6E6C5 for ; Thu, 3 Jul 2014 03:54:07 -0700 (PDT) In-Reply-To: <1404385541-15075-1-git-send-email-shobhit.kumar@intel.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: intel-gfx-bounces@lists.freedesktop.org Sender: "Intel-gfx" To: intel-gfx Cc: Jani Nikula , Daniel Vetter List-Id: intel-gfx@lists.freedesktop.org We should keep DEVICE_READY bit set in the ULPS enter sequence. In exit sequence also we should set DEVICE_READY, but thats causing blankout for me. Also exit sequence is simplified as per hw team recommendation. This should fix - [drm:intel_dsi_clear_device_ready] *ERROR* DSI LP not going Low Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80818 Signed-off-by: Shobhit Kumar --- drivers/gpu/drm/i915/intel_dsi.c | 29 +++++++++++++++-------------- 1 file changed, 15 insertions(+), 14 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c index a6a1355..967a5b6 100644 --- a/drivers/gpu/drm/i915/intel_dsi.c +++ b/drivers/gpu/drm/i915/intel_dsi.c @@ -117,17 +117,18 @@ static void intel_dsi_device_ready(struct intel_encoder *encoder) /* bandgap reset is needed after everytime we do power gate */ band_gap_reset(dev_priv); + I915_WRITE(MIPI_DEVICE_READY(pipe), ULPS_STATE_ENTER); + usleep_range(2500, 3000); + val = I915_READ(MIPI_PORT_CTRL(pipe)); I915_WRITE(MIPI_PORT_CTRL(pipe), val | LP_OUTPUT_HOLD); usleep_range(1000, 1500); - I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY | ULPS_STATE_EXIT); - usleep_range(2000, 2500); - I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY); - usleep_range(2000, 2500); - I915_WRITE(MIPI_DEVICE_READY(pipe), 0x00); - usleep_range(2000, 2500); + + I915_WRITE(MIPI_DEVICE_READY(pipe), ULPS_STATE_EXIT); + usleep_range(2500, 3000); + I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY); - usleep_range(2000, 2500); + usleep_range(2500, 3000); } static void intel_dsi_enable(struct intel_encoder *encoder) @@ -271,23 +272,23 @@ static void intel_dsi_clear_device_ready(struct intel_encoder *encoder) DRM_DEBUG_KMS("\n"); - I915_WRITE(MIPI_DEVICE_READY(pipe), ULPS_STATE_ENTER); + I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY | ULPS_STATE_ENTER); usleep_range(2000, 2500); - I915_WRITE(MIPI_DEVICE_READY(pipe), ULPS_STATE_EXIT); + I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY | ULPS_STATE_EXIT); usleep_range(2000, 2500); - I915_WRITE(MIPI_DEVICE_READY(pipe), ULPS_STATE_ENTER); + I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY | ULPS_STATE_ENTER); usleep_range(2000, 2500); - val = I915_READ(MIPI_PORT_CTRL(pipe)); - I915_WRITE(MIPI_PORT_CTRL(pipe), val & ~LP_OUTPUT_HOLD); - usleep_range(1000, 1500); - if (wait_for(((I915_READ(MIPI_PORT_CTRL(pipe)) & AFE_LATCHOUT) == 0x00000), 30)) DRM_ERROR("DSI LP not going Low\n"); + val = I915_READ(MIPI_PORT_CTRL(pipe)); + I915_WRITE(MIPI_PORT_CTRL(pipe), val & ~LP_OUTPUT_HOLD); + usleep_range(1000, 1500); + I915_WRITE(MIPI_DEVICE_READY(pipe), 0x00); usleep_range(2000, 2500); -- 1.9.1