From: Axel Lin Date: Sun, 10 Aug 2014 09:42:01 +0000 Subject: [lm-sensors] [PATCH] hwmon: (tmp103) Remove duplicate test for I2C_FUNC_SMBUS_BYTE_DATA functionalit Message-Id: <1407663721.6912.9.camel@phoenix> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org Since commit b42261078a91 ("regmap: i2c: fallback to SMBus if the adapter does not support standard I2C"), regmap-i2c will check the I2C_FUNC_SMBUS_[BYTE|WORD]_DATA functionality based on the regmap_config setting if the adapter does not support standard I2C. So remove the I2C_FUNC_SMBUS_BYTE_DATA functionality check in the driver code. Signed-off-by: Axel Lin --- drivers/hwmon/tmp103.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/hwmon/tmp103.c b/drivers/hwmon/tmp103.c index c74d2da..e42964f 100644 --- a/drivers/hwmon/tmp103.c +++ b/drivers/hwmon/tmp103.c @@ -131,13 +131,6 @@ static int tmp103_probe(struct i2c_client *client, struct regmap *regmap; int ret; - if (!i2c_check_functionality(client->adapter, - I2C_FUNC_SMBUS_BYTE_DATA)) { - dev_err(&client->dev, - "adapter doesn't support SMBus byte transactions\n"); - return -ENODEV; - } - regmap = devm_regmap_init_i2c(client, &tmp103_regmap_config); if (IS_ERR(regmap)) { dev_err(dev, "failed to allocate register map\n"); -- 1.9.1 _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors