From: utkarsh Date: Mon, 18 Aug 2014 23:29:59 -0700 (PDT) Subject: [U-Boot] running test application uboot hello_world.bin Message-ID: <1408429799217-186995.post@n7.nabble.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi I have board pxa300 and want to run simple hello_ world.bin binary in uboot I am able to load hello_world.bin through tftp ,but when I give go command it comes out of the application. I checked load addr also its 80008000. please check the log below *$ tftpboot 0x80008000 hello_world.bin * Enabling external transiver signal for LAN DRIVER_VERSION : 110, DATECODE : 080408 LAN9x18 (0x118a0000) detected. start Auto negotiation... (take ~2sec) Auto negotiation complete, 100BaseTX, full duplex TFTP from server 10.1.1.72; our IP address is 10.1.1.100 Filename 'hello_world.bin'. Load address: 0x80008000 Loading: T # done Bytes transferred = 624 (270 hex) *$ go 0x80008000* ## Starting application at 0x80008000 ... ## Application terminated, rc = 0x0 Dont know whether address what iam giving is wrong Regards Utkarsh Rawat -- View this message in context: http://u-boot.10912.n7.nabble.com/running-test-application-uboot-hello-world-bin-tp186995.html Sent from the U-Boot mailing list archive at Nabble.com.