From: nm@ti.com (Nishanth Menon) Date: Wed, 3 Sep 2014 13:46:21 -0500 Subject: [PATCH] ARM: dts: am437x-gp: switch i2c0 to 100KHz Message-ID: <1409769981-17669-1-git-send-email-nm@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On the GP EVM, the ambient light sensor is limited to 100KHz on the I2C bus. So use 100kHz for I2C on the GP EVM due to this limitation on the ambient light sensor. Reported-by: Aparna Balasubramanian Signed-off-by: Nishanth Menon --- based on v3.17-rc1 arch/arm/boot/dts/am437x-gp-evm.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 646a6ea..9559c19 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -260,7 +260,7 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>; - clock-frequency = <400000>; + clock-frequency = <100000>; tps65218: tps65218 at 24 { reg = <0x24>; -- 1.7.9.5