From: Lars-Peter Clausen Subject: [PATCH 5/5] ASoC: sgtl5000: Cleanup bias level transitions Date: Sat, 6 Sep 2014 14:29:35 +0200 Message-ID: <1410006575-499-5-git-send-email-lars@metafoo.de> References: <1410006575-499-1-git-send-email-lars@metafoo.de> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from smtp-out-247.synserver.de (smtp-out-247.synserver.de [212.40.185.247]) by alsa0.perex.cz (Postfix) with ESMTP id BA475264F28 for ; Sat, 6 Sep 2014 14:29:44 +0200 (CEST) In-Reply-To: <1410006575-499-1-git-send-email-lars@metafoo.de> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: Mark Brown , Liam Girdwood Cc: Fabio Estevam , alsa-devel@alsa-project.org, Lars-Peter Clausen , Tomoya MORINAGA , Haojian Zhuang , Sean Cross List-Id: alsa-devel@alsa-project.org Set the CODEC driver's suspend_bias_off flag rather than manually going to SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes the code a bit shorter and cleaner. Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either. The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe() can also be removed as the core will automatically do this after the CODEC has been probed. Signed-off-by: Lars-Peter Clausen --- sound/soc/codecs/sgtl5000.c | 30 +----------------------------- 1 file changed, 1 insertion(+), 29 deletions(-) diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index e997d27..a604a22 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -1073,26 +1073,6 @@ static bool sgtl5000_readable(struct device *dev, unsigned int reg) } } -#ifdef CONFIG_SUSPEND -static int sgtl5000_suspend(struct snd_soc_codec *codec) -{ - sgtl5000_set_bias_level(codec, SND_SOC_BIAS_OFF); - - return 0; -} - -static int sgtl5000_resume(struct snd_soc_codec *codec) -{ - /* Bring the codec back up to standby to enable regulators */ - sgtl5000_set_bias_level(codec, SND_SOC_BIAS_STANDBY); - - return 0; -} -#else -#define sgtl5000_suspend NULL -#define sgtl5000_resume NULL -#endif /* CONFIG_SUSPEND */ - /* * sgtl5000 has 3 internal power supplies: * 1. VAG, normally set to vdda/2 @@ -1352,11 +1332,6 @@ static int sgtl5000_probe(struct snd_soc_codec *codec) */ snd_soc_write(codec, SGTL5000_DAP_CTRL, 0); - /* leading to standby state */ - ret = sgtl5000_set_bias_level(codec, SND_SOC_BIAS_STANDBY); - if (ret) - goto err; - return 0; err: @@ -1373,8 +1348,6 @@ static int sgtl5000_remove(struct snd_soc_codec *codec) { struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec); - sgtl5000_set_bias_level(codec, SND_SOC_BIAS_OFF); - regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies), sgtl5000->supplies); regulator_bulk_free(ARRAY_SIZE(sgtl5000->supplies), @@ -1387,9 +1360,8 @@ static int sgtl5000_remove(struct snd_soc_codec *codec) static struct snd_soc_codec_driver sgtl5000_driver = { .probe = sgtl5000_probe, .remove = sgtl5000_remove, - .suspend = sgtl5000_suspend, - .resume = sgtl5000_resume, .set_bias_level = sgtl5000_set_bias_level, + .suspend_bias_off = true, .controls = sgtl5000_snd_controls, .num_controls = ARRAY_SIZE(sgtl5000_snd_controls), .dapm_widgets = sgtl5000_dapm_widgets, -- 1.8.0