Return-Path: Received: from mail-wg0-f53.google.com ([74.125.82.53]:51103 "EHLO mail-wg0-f53.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751455AbaKBDTO (ORCPT ); Sat, 1 Nov 2014 23:19:14 -0400 Received: by mail-wg0-f53.google.com with SMTP id b13so8852666wgh.40 for ; Sat, 01 Nov 2014 20:19:13 -0700 (PDT) From: Alexander Aring Subject: [PATCH bluetooth-next 03/16] at86rf230: add default channel settings Date: Sun, 2 Nov 2014 04:18:34 +0100 Message-Id: <1414898327-20759-4-git-send-email-alex.aring@gmail.com> In-Reply-To: <1414898327-20759-1-git-send-email-alex.aring@gmail.com> References: <1414898327-20759-1-git-send-email-alex.aring@gmail.com> Sender: linux-wpan-owner@vger.kernel.org List-ID: To: linux-wpan@vger.kernel.org Cc: kernel@pengutronix.de, Alexander Aring This patch sets the reset state channels accoridng at86rf2xx datasheets. We don't need to set the default page here which is zero on all chips. Signed-off-by: Alexander Aring --- drivers/net/ieee802154/at86rf230.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index 624080d..f68ebba 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -1427,6 +1427,7 @@ at86rf230_detect_device(struct at86rf230_local *lp) chip = "at86rf231"; lp->data = &at86rf231_data; lp->hw->phy->channels_supported[0] = 0x7FFF800; + lp->hw->phy->current_channel = 11; break; case 7: chip = "at86rf212"; @@ -1435,6 +1436,7 @@ at86rf230_detect_device(struct at86rf230_local *lp) lp->hw->flags |= IEEE802154_HW_LBT; lp->hw->phy->channels_supported[0] = 0x00007FF; lp->hw->phy->channels_supported[2] = 0x00007FF; + lp->hw->phy->current_channel = 5; } else { rc = -ENOTSUPP; } @@ -1443,6 +1445,7 @@ at86rf230_detect_device(struct at86rf230_local *lp) chip = "at86rf233"; lp->data = &at86rf233_data; lp->hw->phy->channels_supported[0] = 0x7FFF800; + lp->hw->phy->current_channel = 13; break; default: chip = "unkown"; -- 2.1.3