From: harsha kiran Date: Thu, 6 Nov 2014 08:30:35 -0700 (MST) Subject: [U-Boot] Can i pass pass an environmental variable or argument from command line to build u-boot? Message-ID: <1415287835274-194962.post@n7.nabble.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi ! For our project, we are trying to build the Bootloader with a Software partnumber. and i want it to be displayed on the first U-boot print.. U-Boot 2014.07 (Nov 05 2014 - 16:27:50) PN#12345678-001 I2C: ready DRAM: 256 MiB WARNING: Caches not enabled MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Using default environment I was able to do this by adding the following in the boards.cfg file.. Active arm armv7 am33xx ti am335x_abb_uboot am335x_abb_uboot_npa_dev am335x_abb_uboot:SERIAL4,CONS_INDEX=4,NPA_DEV,IDENT_STRING="PN#12345678-001" But i want to pass the IDENT_STRING from the command line to build the u-boot..the command i use is sudo make ARCH=arm CROSS_COMPILE=/abb/compilers/gcc-linaro-arm-linux-gnueabihf-4.7-2013.04-20130415_linux/bin/arm-linux-gnueabihf- -j8 -s am335x_abb_uboot_npa_dev_config is there a way i can pass this argument while building the u-boot? Thanks, Harsha -- View this message in context: http://u-boot.10912.n7.nabble.com/Can-i-pass-pass-an-environmental-variable-or-argument-from-command-line-to-build-u-boot-tp194962.html Sent from the U-Boot mailing list archive at Nabble.com.