From: Alexey Brodkin Date: Thu, 6 Nov 2014 19:18:25 +0300 Subject: [Buildroot] [PATCH 2/2] board: add support for ARC AXS103 Software Development Platform In-Reply-To: <1415290705-994-1-git-send-email-abrodkin@synopsys.com> References: <1415290705-994-1-git-send-email-abrodkin@synopsys.com> Message-ID: <1415290705-994-3-git-send-email-abrodkin@synopsys.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net The AXS103 Platform consists of a DesignWare AXC003 CPU Card (typically with ARC HS38 core) mounted on an ARC Software Development Platform Mainboard with DesignWare peripherals: * SD/MMC contoller * Gigabit network contoller * Serial ports (8250-compatible) * USB 2.0 * SPI * I2C It also houses HDMI output for extrenal monitor connection. As of today Linux kernel sources are not published for ARC HS core so kernel could be built from custom tarball with sources if required. When kernel sources for ARC HS are released this configuration will be updated. But even now rootfs image could be built with Buildroot for ARC HS since gcc, binutils and uClibc for ARC already has support of the new core starting from version "arc-2014.08". Signed-off-by: Alexey Brodkin Cc: Anton Kolesov Cc: Thomas Petazzoni Cc: Peter Korsgaard --- configs/axs103_defconfig | 9 +++++++++ 1 file changed, 9 insertions(+) create mode 100644 configs/axs103_defconfig diff --git a/configs/axs103_defconfig b/configs/axs103_defconfig new file mode 100644 index 0000000..5be8fad --- /dev/null +++ b/configs/axs103_defconfig @@ -0,0 +1,9 @@ +BR2_arcle=y +BR2_archs38=y +BR2_TOOLCHAIN_BUILDROOT_LARGEFILE=y +BR2_TOOLCHAIN_BUILDROOT_INET_IPV6=y +BR2_TOOLCHAIN_BUILDROOT_INET_RPC=y +BR2_TARGET_GENERIC_GETTY_PORT="ttyS3" +BR2_PACKAGE_LMBENCH=y +BR2_PACKAGE_LTP_TESTSUITE=y +BR2_TARGET_ROOTFS_CPIO=y -- 1.9.3