From: bomellberg Date: Mon, 17 Nov 2014 04:57:00 -0700 (MST) Subject: [U-Boot] loadb problem. Hangs on START_CHAR In-Reply-To: <20141117114440.822773814FF@gemini.denx.de> References: <1415364802594-195144.post@n7.nabble.com> <1415622808801-195379.post@n7.nabble.com> <20141110125119.79476383346@gemini.denx.de> <1415624206506-195381.post@n7.nabble.com> <1416218063825-196499.post@n7.nabble.com> <20141117114440.822773814FF@gemini.denx.de> Message-ID: <1416225420788-196515.post@n7.nabble.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Wolfgang, Yes, those settings are all in my .kermrc setup. I measured the fastest pulse on my scope to 8.691 ?s, which gives 1/(8.691 x 1e-6) = 115061.56 baud. Not really 115200 but is it too far from working in your opinion? The tolerance in RS232 signalling is about 50% of the minimum pulse width for a byte which would be about 113000 - 117000 baud. /Bo -- View this message in context: http://u-boot.10912.n7.nabble.com/loadb-problem-Hangs-on-START-CHAR-tp195144p196515.html Sent from the U-Boot mailing list archive at Nabble.com.