From: bomellberg Date: Mon, 17 Nov 2014 06:23:04 -0700 (MST) Subject: [U-Boot] loadb problem. Hangs on START_CHAR In-Reply-To: <20141117123937.62BF03814FF@gemini.denx.de> References: <1415364802594-195144.post@n7.nabble.com> <1415622808801-195379.post@n7.nabble.com> <20141110125119.79476383346@gemini.denx.de> <1415624206506-195381.post@n7.nabble.com> <1416218063825-196499.post@n7.nabble.com> <20141117114440.822773814FF@gemini.denx.de> <1416225420788-196515.post@n7.nabble.com> <20141117123937.62BF03814FF@gemini.denx.de> Message-ID: <1416230584402-196545.post@n7.nabble.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de "The fastest pulse" = the time that one bit encompasses. The following picture shows sending the character 'U' (0x01010101): Channel 1 shows the 'U' sent from the PC. Channel 2 shows the 'U' sent as reply from the board, which is also displayed on the console. To me it seems fine, with a trailing stop bit as well. I have not altered the 8N1 configuration in the config files for the board. The only change is the use of USART3 instead of USART0. The PC is set to 8N1-115200. -- View this message in context: http://u-boot.10912.n7.nabble.com/loadb-problem-Hangs-on-START-CHAR-tp195144p196545.html Sent from the U-Boot mailing list archive at Nabble.com.