From: bomellberg Date: Tue, 18 Nov 2014 01:43:02 -0700 (MST) Subject: [U-Boot] [SOLVED] loadb problem. In-Reply-To: <20141117133428.861C6380469@gemini.denx.de> References: <1415364802594-195144.post@n7.nabble.com> <1415622808801-195379.post@n7.nabble.com> <20141110125119.79476383346@gemini.denx.de> <1415624206506-195381.post@n7.nabble.com> <1416218063825-196499.post@n7.nabble.com> <20141117114440.822773814FF@gemini.denx.de> <1416225420788-196515.post@n7.nabble.com> <20141117123937.62BF03814FF@gemini.denx.de> <1416230584402-196545.post@n7.nabble.com> <20141117133428.861C6380469@gemini.denx.de> Message-ID: <1416300182202-196641.post@n7.nabble.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Wolfgang, Upon looking at the transfers more closely on the scope, I found that the board sometimes answered the PC in the middle of receiving a packet. I found that this was due to a global DEBUG being turned on in the configuration file for the board. When I removed all of the following: #define DEBUG #define CONFIG_DEBUG_DUMP #define CONFIG_DEBUG_DUMP_SYMS #define CONFIG_DEBUG_EARLY_SERIAL #define CONFIG_DEBUG_NULL_PTR #define TESTING the Kermit transfers are fine, with approximately 4 kilobytes per second transfer rate. Thank you for your time. Hopefully this can help someone in the future. /Bo -- View this message in context: http://u-boot.10912.n7.nabble.com/loadb-problem-Hangs-on-START-CHAR-tp195144p196641.html Sent from the U-Boot mailing list archive at Nabble.com.