From: Bartosz Golaszewski Date: Thu, 27 Nov 2014 09:59:05 +0000 Subject: [lm-sensors] [PATCH v2 0/5] hwmon: ina2xx: fixes & extensions Message-Id: <1417082350-23470-1-git-send-email-bgolaszewski@baylibre.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Guenter Roeck Cc: LKML , Benoit Cousson , Patrick Titiano , LM Sensors , Jean Delvare , Bartosz Golaszewski This series fixes an initialization issue we've experienced with the ina2xx driver and extends the sysfs interface to make the driver configurable at run-time. The shunt_resistor attribute allows to change the shunt resistance value at run-time in cases where ina2xx used to do the measurement isn't integrated with the shunt. The avg_rate attribute allows to increase/decrease noise reduction. Bartosz Golaszewski (5): hwmon: ina2xx: bail-out from ina2xx_probe() in case of configuration errors hwmon: ina2xx: make shunt resistance configurable at run-time hwmon: ina2xx: allow to change the averaging rate at run-time hwmon: ina2xx: change hex constants to lower-case hwmon: ina2xx: documentation update for new sysfs attributes Documentation/hwmon/ina2xx | 10 ++- drivers/hwmon/ina2xx.c | 187 +++++++++++++++++++++++++++++++++++++++++---- 2 files changed, 181 insertions(+), 16 deletions(-) -- 2.1.3 _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors