From: Bartosz Golaszewski Date: Wed, 03 Dec 2014 10:54:14 +0000 Subject: [lm-sensors] [PATCH v3 3/3] hwmon: ina2xx: documentation update for new sysfs attributes Message-Id: <1417604054-8694-4-git-send-email-bartekgola@gmail.com> List-Id: References: <1417604054-8694-1-git-send-email-bartekgola@gmail.com> In-Reply-To: <1417604054-8694-1-git-send-email-bartekgola@gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Guenter Roeck Cc: LKML , Benoit Cousson , Patrick Titiano , LM Sensors , Bartosz Golaszewski Include the rshunt and avg sysfs attributes for ina2xx in the documentation. Signed-off-by: Bartosz Golaszewski --- Documentation/hwmon/ina2xx | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/Documentation/hwmon/ina2xx b/Documentation/hwmon/ina2xx index 4223c2d..c100c24 100644 --- a/Documentation/hwmon/ina2xx +++ b/Documentation/hwmon/ina2xx @@ -44,6 +44,10 @@ The INA226 monitors both a shunt voltage drop and bus supply voltage. The INA230 is a high or low side current shunt and power monitor with an I2C interface. The INA230 monitors both a shunt voltage drop and bus supply voltage. -The shunt value in micro-ohms can be set via platform data or device tree. -Please refer to the Documentation/devicetree/bindings/i2c/ina2xx.txt for bindings -if the device tree is used. +The shunt value in micro-ohms can be set via platform data or device tree in +compile-time or via the shunt_resistor attribute in sysfs in run-time. Please +refer to the Documentation/devicetree/bindings/i2c/ina2xx.txt for bindings if +the device tree is used. + +The averaging rate of INA226 and INA230 can be changed via the avg_rate sysfs +attribute. The available rates are: 1, 4, 16, 64, 128, 256, 512 and 1024. -- 2.1.3 _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors