From: Stefan Roese Date: Mon, 26 Jan 2015 14:35:30 +0100 Subject: [U-Boot] [PATCH 3/4] powerpc: ppc4xx: Add defaults for DT based booting to really work In-Reply-To: <1422279331-25239-1-git-send-email-sr@denx.de> References: <1422279331-25239-1-git-send-email-sr@denx.de> Message-ID: <1422279331-25239-3-git-send-email-sr@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de These additional nodes need to be provided to get U-Boot to boot correctly on the Canyonlands / Glacier board: - chosen path to the console-uart - reg-shift set to 0 in the uart device nodes Signed-off-by: Stefan Roese Cc: Simon Glass --- arch/powerpc/dts/canyonlands.dts | 6 ++++++ arch/powerpc/dts/glacier.dts | 3 +++ 2 files changed, 9 insertions(+) diff --git a/arch/powerpc/dts/canyonlands.dts b/arch/powerpc/dts/canyonlands.dts index 2ec9762..0a2f5d7 100644 --- a/arch/powerpc/dts/canyonlands.dts +++ b/arch/powerpc/dts/canyonlands.dts @@ -22,6 +22,10 @@ serial1 = &UART1; }; + chosen { + stdout-path = &UART0; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -280,6 +284,7 @@ UART0: serial at ef600300 { device_type = "serial"; + reg-shift = <0>; compatible = "ns16550"; reg = <0xef600300 0x00000008>; virtual-reg = <0xef600300>; @@ -291,6 +296,7 @@ UART1: serial at ef600400 { device_type = "serial"; + reg-shift = <0>; compatible = "ns16550"; reg = <0xef600400 0x00000008>; virtual-reg = <0xef600400>; diff --git a/arch/powerpc/dts/glacier.dts b/arch/powerpc/dts/glacier.dts index 3e7ce2c..bb4e819 100644 --- a/arch/powerpc/dts/glacier.dts +++ b/arch/powerpc/dts/glacier.dts @@ -251,6 +251,7 @@ UART1: serial at ef600400 { device_type = "serial"; + reg-shift = <0>; compatible = "ns16550"; reg = <0xef600400 0x00000008>; virtual-reg = <0xef600400>; @@ -262,6 +263,7 @@ UART2: serial at ef600500 { device_type = "serial"; + reg-shift = <0>; compatible = "ns16550"; reg = <0xef600500 0x00000008>; virtual-reg = <0xef600500>; @@ -273,6 +275,7 @@ UART3: serial at ef600600 { device_type = "serial"; + reg-shift = <0>; compatible = "ns16550"; reg = <0xef600600 0x00000008>; virtual-reg = <0xef600600>; -- 2.2.2