Return-Path: Received: from mail-we0-f171.google.com ([74.125.82.171]:35898 "EHLO mail-we0-f171.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754715AbbBBTxd (ORCPT ); Mon, 2 Feb 2015 14:53:33 -0500 Received: by mail-we0-f171.google.com with SMTP id k11so38719671wes.2 for ; Mon, 02 Feb 2015 11:53:31 -0800 (PST) From: Alexander Aring Subject: [PATCH wpan-misc] website: add note about sniffing frontend on host side Date: Mon, 2 Feb 2015 20:53:14 +0100 Message-Id: <1422906794-20410-1-git-send-email-alex.aring@gmail.com> Sender: linux-wpan-owner@vger.kernel.org List-ID: To: linux-wpan@vger.kernel.org Cc: Alexander Aring This patch adds a little note how to start a wireshark frontend on the host side and pipe all traffic through a ssh connection. Signed-off-by: Alexander Aring --- website/index.txt | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/website/index.txt b/website/index.txt index 4aaaab7..7331534 100644 --- a/website/index.txt +++ b/website/index.txt @@ -98,6 +98,14 @@ iwpan phy wpan-phy0 interface add monitor%d type monitor --------------------------------------------------------------------- Then bring this interface up and run wireshark, tcpdump, etc... on it. +Running a wireshark as sniffing frontend on the $HOST and connect to a $TARGET like Raspberry Pi which have some ethernet ssh connection, you can try: + +--------------------------------------------------------------------- +ssh root@$TARGET 'tshark -i monitor0 -w -' | wireshark -k -i - +--------------------------------------------------------------------- + +This will pipe all sniffing frames from $TARGET side to $HOST running wireshark application. +Note you need maybe to change the "$TARGET" and "montior0" to your settings. ////// Foren6 -- 2.2.2