From: Chris Packham Date: Mon, 23 Feb 2015 11:25:19 +1300 Subject: [U-Boot] [RFC PATCH v1 0/1] Generating kwb image for custom board Message-ID: <1424643920-2237-1-git-send-email-judge.packham@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi, I'm trying to get u-boot 2015.01 up and running on a custom board using an integrated version of Marvell's Armada-XP in a switch ASIC (the Marvell term is MSYS). One thing I ran into after extracting the DDR initialisation from the Marvell bootloader was that the Bootrom Firmware (Marvell's pre-bootloader) reported the following BootROM 1.34 Booting from SPI flash BootROM: Bad header at offset 00000000 BootROM: Bad header at offset 00200000 ... After a bit of debugging I found that this was because the binary.0 for my board had a length of 0x0148ec which doesn't conform to the following requirement in the Marvell functional spec -- "The header length in bytes. The value must be aligned to 4B." While I could pad out my binary.0 it seems safer to update kwbimage.c to conform with the specification. The original issue still exists in master but I suspect now that master is using a u-boot-spl image for the Armada-XP boards the spl image is implicitly conformant. Chris Packham (1): kwbimage: Align v1 binary header to 4B tools/kwbimage.c | 1 + 1 file changed, 1 insertion(+) -- 2.2.0.rc0