Return-Path: From: lizf@kernel.org To: stable@vger.kernel.org Cc: linux-kernel@vger.kernel.org, Macpaul Lin , Pavankumar Kondeti , Vijayavardhan Vennapusa , Greg Kroah-Hartman , Zefan Li Subject: [PATCH 3.4 124/176] USB: Add OTG PET device to TPL Date: Thu, 9 Apr 2015 16:46:12 +0800 Message-Id: <1428569224-23820-124-git-send-email-lizf@kernel.org> In-Reply-To: <1428569028-23762-1-git-send-email-lizf@kernel.org> References: <1428569028-23762-1-git-send-email-lizf@kernel.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: From: Macpaul Lin 3.4.107-rc1 review patch. If anyone has any objections, please let me know. ------------------ commit e5dff0e80463cc3fa236e898ef1491b40be70b19 upstream. OTG device shall support this device for allowing compliance automated testing. The modification is derived from Pavankumar and Vijayavardhans' previous work. Signed-off-by: Macpaul Lin Cc: Pavankumar Kondeti Cc: Vijayavardhan Vennapusa Signed-off-by: Greg Kroah-Hartman Signed-off-by: Zefan Li --- drivers/usb/core/otg_whitelist.h | 5 +++++ drivers/usb/core/quirks.c | 4 ++++ 2 files changed, 9 insertions(+) diff --git a/drivers/usb/core/otg_whitelist.h b/drivers/usb/core/otg_whitelist.h index e8cdce5..2753cec 100644 --- a/drivers/usb/core/otg_whitelist.h +++ b/drivers/usb/core/otg_whitelist.h @@ -59,6 +59,11 @@ static int is_targeted(struct usb_device *dev) le16_to_cpu(dev->descriptor.idProduct) == 0xbadd)) return 0; + /* OTG PET device is always targeted (see OTG 2.0 ECN 6.4.2) */ + if ((le16_to_cpu(dev->descriptor.idVendor) == 0x1a0a && + le16_to_cpu(dev->descriptor.idProduct) == 0x0200)) + return 1; + /* NOTE: can't use usb_match_id() since interface caches * aren't set up yet. this is cut/paste from that code. */ diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index a60c5b7..9fac46d 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -175,6 +175,10 @@ static const struct usb_device_id usb_interface_quirk_list[] = { { USB_DEVICE(0x0b05, 0x17e0), .driver_info = USB_QUIRK_IGNORE_REMOTE_WAKEUP }, + /* Protocol and OTG Electrical Test Device */ + { USB_DEVICE(0x1a0a, 0x0200), .driver_info = + USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL }, + { } /* terminating entry must be last */ }; -- 1.9.1