From: Ash Charles Date: Tue, 28 Apr 2015 16:17:49 -0700 Subject: [U-Boot] [PATCH 0/6] omap3: overo: collected fixes Message-ID: <1430263075-27682-1-git-send-email-ashcharles@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de This series collects several board-enablement fixes for the Gumstix Overo as well as switching to BCH8 for NAND ECC, updating the UBI boot sequence for DTB-based boots, and correcting a RAM configuration for Overo COMs of Revision 0. This series follows after the series previously submitted: http://lists.denx.de/pipermail/u-boot/2015-April/211651.html Arun Bharadwaj (2): omap3: overo: Add DTS support for TobiDuo expansion overo: Override RAM setup for rev. 0 boards Ash Charles (4): omap3: overo: Set the Arbor43C 'expansionname' overo: Add support for Palo35 expansion board omap3: overo: Use software BCH8 ECC for NAND omap3: overo: Allow boot with kernel in UBI rootfs board/overo/overo.c | 3 +++ board/overo/spl.c | 2 +- include/configs/omap3_overo.h | 32 ++++++++++++++++++++++++++++---- 3 files changed, 32 insertions(+), 5 deletions(-) -- 2.1.4