From: Steffan Karger Date: Mon, 18 May 2015 21:21:09 +0200 Message-Id: <1431976869-4948-1-git-send-email-steffan@...1856...> Subject: [Openvpn-devel] [PATCH] Updated manpage for --rport and --lport List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit To: openvpn-devel@lists.sourceforge.net Cc: Robert Fischer [SK: v2, patch taken from trac #127 and updated to current master branch] Signed-off-by: Robert Fischer Signed-off-by: Steffan Karger --- doc/openvpn.8 | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/doc/openvpn.8 b/doc/openvpn.8 index 23cc789..b9eee0d 100644 --- a/doc/openvpn.8 +++ b/doc/openvpn.8 @@ -670,18 +670,28 @@ peer on its new IP address. .\"********************************************************* .TP .B \-\-port port -TCP/UDP port number or port name for both local and remote. The current +TCP/UDP port number or port name for both local and remote (sets both +.B \-\-lport +and +.B \-\-rport +options to given port). The current default of 1194 represents the official IANA port number assignment for OpenVPN and has been used since version 2.0-beta17. Previous versions used port 5000 as the default. .\"********************************************************* .TP .B \-\-lport port -TCP/UDP port number or name for bind. +Set local TCP/UDP port number or name. Cannot be used together with +.B \-\-nobind +option. .\"********************************************************* .TP .B \-\-rport port -TCP/UDP port number or name for remote. +Set TCP/UDP port number or name used by the +.B \-\-remote +option. The port can also be set directly using the +.B \-\-remote +option. .\"********************************************************* .TP .B \-\-bind [ipv6only] -- 2.1.4