From: Ian Campbell Date: Mon, 29 Jun 2015 10:59:58 +0100 Subject: [U-Boot] FEL mode broken since "sunxi: Move all boards to the driver-model" In-Reply-To: <5590129A.50902@redhat.com> References: <1435348202.17598.61.camel@hellion.org.uk> <5590129A.50902@redhat.com> Message-ID: <1435571998.32500.242.camel@hellion.org.uk> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Sun, 2015-06-28 at 17:28 +0200, Hans de Goede wrote: > Hi, > > On 26-06-15 21:50, Ian Campbell wrote: > > Hi Hans, > > > > Sorry for only just noticing this, but it looks like FEL mode doesn't > > work on my cubietruck since this commit. I get the SPL output: > > > > U-Boot SPL 2015.04-00665-gb6006ba (Jun 26 2015 - 20:38:50) > > DRAM: 2048 MiB > > CPU: 912000000Hz, AXI/AHB/APB: 3/2/2 > > > > But then nothing. > > Right, that is expected, all the "fel spl" command does is load the > spl, Ah, I had (na?vely?) expected that since it took u-boot-sunxi-with-spl.bin as an argument it would do the second half too. I would have expected this to become necessary at with "sunxi: Support the FEL boot mode in the regular u-boot build" rather than at "sunxi: Move all boards to the driver-model". Anyway, I'll try your suggested path tonight. I'm pretty certain that'll end up being it. > Also note that you now need to use > u-boot-dtb.bin not u-boot.bin . Noted, I probably would have got that wrong too, so thanks. Ian.