From: ramki982 Date: Wed, 12 Aug 2015 01:26:13 -0700 (MST) Subject: [U-Boot] regarding u-boot ethernet support for TFTP boot in Banana pi R1 (Lamobo R1) Message-ID: <1439367973065-223553.post@n7.nabble.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear all, I've successfully compiled and running u-boot on the Bananapi R1 board using the instructions in http://linux-sunxi.org/Mainline_U-boot#Compile_U-Boot This board uses a BCM 53125 ethernet chip 4+1 ports 10/100/1000 Ethernet RJ45 (BCM 53125), WLAN @802.11b/g/n (RTL8192CU) with 2x external antennas connectors But when I any try to run any NETWORK related command - i'm getting a "No Link". I do have the ip add, gateway addr, net mask etc set as environment variables. sunxi# ping 192.168.10.1 ethernet at 01c50000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! ethernet at 01c50000: No link. ping failed; host 192.168.10.1 is not alive Could someone help me to understand if the above issue can be fixed by any config changes ? thanks Ram -- View this message in context: http://u-boot.10912.n7.nabble.com/regarding-u-boot-ethernet-support-for-TFTP-boot-in-Banana-pi-R1-Lamobo-R1-tp223553.html Sent from the U-Boot mailing list archive at Nabble.com.