Received: with ECARTIS (v1.0.0; list linux-mips); Sat, 05 Sep 2015 18:47:32 +0200 (CEST) Received: from hall.aurel32.net ([195.154.112.97]:44902 "EHLO hall.aurel32.net" rhost-flags-OK-OK-OK-OK) by eddie.linux-mips.org with ESMTP id S27013565AbbIEQrNcd4tO (ORCPT ); Sat, 5 Sep 2015 18:47:13 +0200 Received: from [37.162.190.121] (helo=ohm.rr44.fr) by hall.aurel32.net with esmtpsa (TLS1.2:ECDHE_RSA_AES_128_GCM_SHA256:128) (Exim 4.84) (envelope-from ) id 1ZYGcS-0007Ou-OY; Sat, 05 Sep 2015 18:47:12 +0200 Received: from aurel32 by ohm.rr44.fr with local (Exim 4.84) (envelope-from ) id 1ZYGcK-0001TI-Jm; Sat, 05 Sep 2015 18:47:04 +0200 From: Aurelien Jarno To: linux-mips@linux-mips.org Cc: Aurelien Jarno , Ralf Baechle , Markos Chandras Subject: [PATCH 2/2 for-4.3] MIPS: BPF: Fix build on pre-R2 little endian CPUs Date: Sat, 5 Sep 2015 18:46:57 +0200 Message-Id: <1441471618-5613-2-git-send-email-aurelien@aurel32.net> X-Mailer: git-send-email 2.1.4 In-Reply-To: <1441471618-5613-1-git-send-email-aurelien@aurel32.net> References: <1441471618-5613-1-git-send-email-aurelien@aurel32.net> Return-Path: X-Envelope-To: <"|/home/ecartis/ecartis -s linux-mips"> (uid 0) X-Orcpt: rfc822;linux-mips@linux-mips.org Original-Recipient: rfc822;linux-mips@linux-mips.org X-archive-position: 49112 X-ecartis-version: Ecartis v1.0.0 Sender: linux-mips-bounce@linux-mips.org Errors-to: linux-mips-bounce@linux-mips.org X-original-sender: aurelien@aurel32.net Precedence: bulk List-help: List-unsubscribe: List-software: Ecartis version 1.0.0 List-Id: linux-mips X-List-ID: linux-mips List-subscribe: List-owner: List-post: List-archive: X-list: linux-mips The rotr, seh and wsbh instructions have been introduced with the R2 ISA. Thus the current BPF code fails to build on pre-R2 little endian CPUs: CC arch/mips/net/bpf_jit.o AS arch/mips/net/bpf_jit_asm.o /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S: Assembler messages: /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:67: Error: opcode not supported on this processor: mips32 (mips32) `wsbh $8,$19' /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:68: Error: opcode not supported on this processor: mips32 (mips32) `rotr $19,$8,16' /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:83: Error: opcode not supported on this processor: mips32 (mips32) `wsbh $8,$19' /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:84: Error: opcode not supported on this processor: mips32 (mips32) `seh $19,$8' /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:151: Error: opcode not supported on this processor: mips32 (mips32) `wsbh $8,$12' /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:153: Error: opcode not supported on this processor: mips32 (mips32) `rotr $19,$8,16' /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:164: Error: opcode not supported on this processor: mips32 (mips32) `wsbh $19,$12' /home/aurel32/linux-4.2/scripts/Makefile.build:294: recipe for target 'arch/mips/net/bpf_jit_asm.o' failed Fix that by providing equivalent code for these CPUs. Cc: Ralf Baechle Cc: Markos Chandras Cc: stable@vger.kernel.org # v4.2+ Signed-off-by: Aurelien Jarno --- arch/mips/net/bpf_jit_asm.S | 42 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/arch/mips/net/bpf_jit_asm.S b/arch/mips/net/bpf_jit_asm.S index 4f54cb1..dabf417 100644 --- a/arch/mips/net/bpf_jit_asm.S +++ b/arch/mips/net/bpf_jit_asm.S @@ -64,8 +64,20 @@ sk_load_word_positive: PTR_ADDU t1, $r_skb_data, offset lw $r_A, 0(t1) #ifdef CONFIG_CPU_LITTLE_ENDIAN +# if defined(__mips_isa_rev) && (__mips_isa_rev >= 2) wsbh t0, $r_A rotr $r_A, t0, 16 +# else + sll t0, $r_A, 24 + srl t1, $r_A, 24 + srl t2, $r_A, 8 + or t0, t0, t1 + andi t2, t2, 0xff00 + andi t1, $r_A, 0xff00 + or t0, t0, t2 + sll t1, t1, 8 + or $r_A, t0, t1 +# endif #endif jr $r_ra move $r_ret, zero @@ -80,8 +92,16 @@ sk_load_half_positive: PTR_ADDU t1, $r_skb_data, offset lh $r_A, 0(t1) #ifdef CONFIG_CPU_LITTLE_ENDIAN +# if defined(__mips_isa_rev) && (__mips_isa_rev >= 2) wsbh t0, $r_A seh $r_A, t0 +# else + sll t0, $r_A, 24 + andi t1, $r_A, 0xff00 + sra t0, t0, 16 + srl t1, t1, 8 + or $r_A, t0, t1 +# endif #endif jr $r_ra move $r_ret, zero @@ -148,9 +168,22 @@ sk_load_byte_positive: NESTED(bpf_slow_path_word, (6 * SZREG), $r_sp) bpf_slow_path_common(4) #ifdef CONFIG_CPU_LITTLE_ENDIAN +# if defined(__mips_isa_rev) && (__mips_isa_rev >= 2) wsbh t0, $r_s0 jr $r_ra rotr $r_A, t0, 16 +# else + sll t0, $r_s0, 24 + srl t1, $r_s0, 24 + srl t2, $r_s0, 8 + or t0, t0, t1 + andi t2, t2, 0xff00 + andi t1, $r_s0, 0xff00 + or t0, t0, t2 + sll t1, t1, 8 + jr $r_ra + or $r_A, t0, t1 +# endif #else jr $r_ra move $r_A, $r_s0 @@ -161,8 +194,17 @@ NESTED(bpf_slow_path_word, (6 * SZREG), $r_sp) NESTED(bpf_slow_path_half, (6 * SZREG), $r_sp) bpf_slow_path_common(2) #ifdef CONFIG_CPU_LITTLE_ENDIAN +# if defined(__mips_isa_rev) && (__mips_isa_rev >= 2) jr $r_ra wsbh $r_A, $r_s0 +# else + sll t0, $r_s0, 8 + andi t1, $r_s0, 0xff00 + andi t0, t0, 0xff00 + srl t1, t1, 8 + jr $r_ra + or $r_A, t0, t1 +# endif #else jr $r_ra move $r_A, $r_s0 -- 2.1.4