From: tony@atomide.com (Tony Lindgren) Date: Mon, 14 Sep 2015 08:19:53 -0700 Subject: [PATCH] ARM: dts: Fix dm814x control base to properly initialize Ethernet PHY Message-ID: <1442243993-30056-1-git-send-email-tony@atomide.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Looks like I made a typo on the control base, all the 81xx SoCs have it at 0x48140000 base. We've just gotten away with the typo as the Ethernet phy was configured by the bootloader on my test system and we're not yet using the pinctrl. In addition to fixing the contol base, we need to also use the right Ethernet phy flags to initialize it. And we are still missing the PLL driver for dm814x and only relying on the divider and mux clocks. Fixes: f3d953ea3721 ("ARM: dts: Add minimal dm814x support") Cc: Matthijs van Duin Cc: Nicolas Chauvet Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dm8148-evm.dts | 4 ++-- arch/arm/boot/dts/dm8148-t410.dts | 4 ++-- arch/arm/boot/dts/dm814x.dtsi | 8 ++++---- 3 files changed, 8 insertions(+), 8 deletions(-) --- a/arch/arm/boot/dts/dm8148-evm.dts +++ b/arch/arm/boot/dts/dm8148-evm.dts @@ -19,10 +19,10 @@ &cpsw_emac0 { phy_id = <&davinci_mdio>, <0>; - phy-mode = "mii"; + phy-mode = "rgmii"; }; &cpsw_emac1 { phy_id = <&davinci_mdio>, <1>; - phy-mode = "mii"; + phy-mode = "rgmii"; }; --- a/arch/arm/boot/dts/dm8148-t410.dts +++ b/arch/arm/boot/dts/dm8148-t410.dts @@ -19,10 +19,10 @@ &cpsw_emac0 { phy_id = <&davinci_mdio>, <0>; - phy-mode = "mii"; + phy-mode = "rgmii"; }; &cpsw_emac1 { phy_id = <&davinci_mdio>, <1>; - phy-mode = "mii"; + phy-mode = "rgmii"; }; --- a/arch/arm/boot/dts/dm814x.dtsi +++ b/arch/arm/boot/dts/dm814x.dtsi @@ -181,9 +181,9 @@ ti,hwmods = "timer3"; }; - control: control at 160000 { + control: control at 140000 { compatible = "ti,dm814-scm", "simple-bus"; - reg = <0x160000 0x16d000>; + reg = <0x140000 0x16d000>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x160000 0x16d000>; @@ -321,9 +321,9 @@ mac-address = [ 00 00 00 00 00 00 ]; }; - phy_sel: cpsw-phy-sel at 0x48160650 { + phy_sel: cpsw-phy-sel at 48140650 { compatible = "ti,am3352-cpsw-phy-sel"; - reg= <0x48160650 0x4>; + reg= <0x48140650 0x4>; reg-names = "gmii-sel"; }; }; -- 2.1.4