From: DaveKucharczyk Date: Thu, 17 Sep 2015 06:15:52 -0700 (MST) Subject: [U-Boot] Trying to load old kernel with new u-boot In-Reply-To: References: <1442352289836-228429.post@n7.nabble.com> <1442420220964-228444.post@n7.nabble.com> Message-ID: <1442495752915-228518.post@n7.nabble.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Fabio Estevam-2 wrote > I meant "different parents for the uart clock" Fabio, that would make sense why it doesn't work when setting 2014 u-boot CSCDR1 to the value in 2009 u-boot. I can check all the combinations of clock division I want and it's never going to work since the parent is different. The patch for u-boot 2009.08 states... ------------------ Subject: [PATCH] ENGR00133727: uart outputs messy code when kernel starts on mx51 uart outputs messy code when kernel starts on mx51. Change uart clock to use pll2 as source clock. ------------------ Looks like we never implemented that patch in our 2009 u-boot. Looks like that patch made it to 2014 u-boot. So I tried setting the uart clock parent to default in u-boot 2014 in arch/arm/cpu/armv7/mx5/lowlevel_init.S, but still the same thing happens. Any suggestions? Basically I want kernel 2.6.35 to boot cleanly on the console using u-boot 2014 on an mx51 board. -- View this message in context: http://u-boot.10912.n7.nabble.com/Trying-to-load-old-kernel-with-new-u-boot-tp228429p228518.html Sent from the U-Boot mailing list archive at Nabble.com.