From: Heiko Schocher Date: Mon, 28 Sep 2015 11:36:05 +0200 Subject: [U-Boot] [PATCH v2] arm, at91: small updates for the smartweb board Message-ID: <1443432965-29958-1-git-send-email-hs@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de - add CONFIG_BOOT_RETRY_TIME to 30 - fex LED colors - fix button pressed combination - add CONFIG_USB_HOST_ETHER CONFIG_USB_ETHER_ASIX CONFIG_USB_ETHER_MCS7830 Signed-off-by: Heiko Schocher Signed-off-by: Matthias Michel --- $ ./tools/buildman/buildman -b 20150923 at91 WARNING: no status info for 'dra72_evm' WARNING: no maintainers for 'dra72_evm' WARNING: no status info for 'am335x_gp_evm' WARNING: no maintainers for 'am335x_gp_evm' WARNING: no status info for 'hikey' WARNING: no maintainers for 'hikey' Building 5 commits for 61 boards (8 threads, 1 job per thread) Cloning repo for thread 0 Cloning repo for thread 1 Cloning repo for thread 2 Cloning repo for thread 3 Cloning repo for thread 4 Cloning repo for thread 5 Cloning repo for thread 6 Cloning repo for thread 7 305 0 0 /305 axm Changes in v2: - add comments from Andreas Biessmann: remove CONFIG_SYS_PROMPT from board config file as CONFIG_SYS_PROMPT is already defined in smartweb_defconfig. board/siemens/smartweb/smartweb.c | 25 ++++++++++++++----------- include/configs/smartweb.h | 4 ++++ 2 files changed, 18 insertions(+), 11 deletions(-) diff --git a/board/siemens/smartweb/smartweb.c b/board/siemens/smartweb/smartweb.c index 2d42488..d82f1b7 100644 --- a/board/siemens/smartweb/smartweb.c +++ b/board/siemens/smartweb/smartweb.c @@ -90,7 +90,8 @@ static void smartweb_macb_hw_init(void) pin_to_mask(AT91_PIN_PA17) | pin_to_mask(AT91_PIN_PA25) | pin_to_mask(AT91_PIN_PA26) | - pin_to_mask(AT91_PIN_PA28), + pin_to_mask(AT91_PIN_PA28) | + pin_to_mask(AT91_PIN_PA29), &pioa->pudr); at91_phy_reset(); @@ -101,7 +102,8 @@ static void smartweb_macb_hw_init(void) pin_to_mask(AT91_PIN_PA17) | pin_to_mask(AT91_PIN_PA25) | pin_to_mask(AT91_PIN_PA26) | - pin_to_mask(AT91_PIN_PA28), + pin_to_mask(AT91_PIN_PA28) | + pin_to_mask(AT91_PIN_PA29), &pioa->puer); /* Initialize EMAC=MACB hardware */ @@ -141,13 +143,6 @@ int board_early_init_f(void) int board_init(void) { - /* Adress of boot parameters */ - gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - - smartweb_nand_hw_init(); -#ifdef CONFIG_MACB - smartweb_macb_hw_init(); -#endif /* power LED red */ at91_set_gpio_output(AT91_PIN_PC6, 0); at91_set_gpio_output(AT91_PIN_PC7, 1); @@ -163,6 +158,13 @@ int board_init(void) at91_udc_probe(&board_udc_data); #endif + /* Adress of boot parameters */ + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + + smartweb_nand_hw_init(); +#ifdef CONFIG_MACB + smartweb_macb_hw_init(); +#endif return 0; } @@ -197,6 +199,7 @@ void matrix_init(void) void spl_board_init(void) { + /* power LED orange */ at91_set_gpio_output(AT91_PIN_PC6, 1); at91_set_gpio_output(AT91_PIN_PC7, 1); /* alarm LED orange */ @@ -212,8 +215,8 @@ void spl_board_init(void) /* check if both button are pressed */ if (at91_get_gpio_value(AT91_PIN_PA28) == 0 && - at91_get_gpio_value(AT91_PIN_PA29) == 0) { - debug("Recovery button pressed\n"); + at91_get_gpio_value(AT91_PIN_PA29) == 0) { + smartweb_nand_hw_init(); nand_init(); spl_nand_erase_one(0, 0); } diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h index d189c3f..e11c016 100644 --- a/include/configs/smartweb.h +++ b/include/configs/smartweb.h @@ -117,6 +117,9 @@ * */ #define CONFIG_MACB +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_USB_ETHER_MCS7830 #define CONFIG_RMII /* use reduced MII inteface */ #define CONFIG_NET_RETRY_COUNT 20 /* # of DHCP/BOOTP retries */ #define CONFIG_AT91_WANTS_COMMON_PHY @@ -182,6 +185,7 @@ /* General Boot Parameter */ #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTCOMMAND "run flashboot" +#define CONFIG_BOOT_RETRY_TIME 30 #define CONFIG_SYS_CBSIZE 512 #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_PBSIZE \ -- 2.1.0