From: Bin Meng Date: Wed, 7 Oct 2015 21:19:30 -0700 Subject: [U-Boot] [PATCH v2 2/3] net: phy: Change to print all phys that are not found In-Reply-To: <1444277971-31252-1-git-send-email-bmeng.cn@gmail.com> References: <1444277971-31252-1-git-send-email-bmeng.cn@gmail.com> Message-ID: <1444277971-31252-2-git-send-email-bmeng.cn@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de In get_phy_device_by_mask(), when no phy is found, currently we only print a message to show the first phy address that is not found. But this is not always the case as multiple phys can be specified by phy_mask. Change to print all phys that are not found, and to reduce the console boot log, change to use 'debug' instead of 'printf'. Signed-off-by: Bin Meng Acked-by: Joe Hershberger --- Changes in v2: None drivers/net/phy/phy.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 4063894..d0b3e85 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -671,7 +671,14 @@ static struct phy_device *get_phy_device_by_mask(struct mii_dev *bus, if (phydev) return phydev; } - printf("Phy %d not found\n", ffs(phy_mask) - 1); + + debug("\n%s PHY: ", bus->name); + while (phy_mask) { + int addr = ffs(phy_mask) - 1; + debug("%d ", addr); + phy_mask &= ~(1 << addr); + } + debug("not found\n"); return NULL; } -- 1.8.2.1