From: Jagan Teki Date: Sat, 24 Oct 2015 09:08:57 +0530 Subject: [U-Boot] [PATCH v5 10/23] spi: mpc8xxx_spi: Use BIT macro In-Reply-To: <1445657950-7117-1-git-send-email-jteki@openedev.com> References: <1445657950-7117-1-git-send-email-jteki@openedev.com> Message-ID: <1445657950-7117-11-git-send-email-jteki@openedev.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Replace numerical bit shift with BIT macro in mpc8xxx_spi :%s/(1 << nr)/BIT(nr)/g where nr = 0, 1, 2 .... 31 Reviewed-by: Tom Rini Signed-off-by: Jagan Teki --- drivers/spi/mpc8xxx_spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/mpc8xxx_spi.c b/drivers/spi/mpc8xxx_spi.c index 0d59c36..00cbcbf 100644 --- a/drivers/spi/mpc8xxx_spi.c +++ b/drivers/spi/mpc8xxx_spi.c @@ -55,7 +55,7 @@ void spi_init(void) * some registers */ spi->mode = SPI_MODE_REV | SPI_MODE_MS | SPI_MODE_EN; - spi->mode = (spi->mode & 0xfff0ffff) | (1 << 16); /* Use SYSCLK / 8 + spi->mode = (spi->mode & 0xfff0ffff) | BIT(16); /* Use SYSCLK / 8 (16.67MHz typ.) */ spi->event = 0xffffffff; /* Clear all SPI events */ spi->mask = 0x00000000; /* Mask all SPI interrupts */ -- 1.9.1