Received: from mail-pa0-x232.google.com ([2607:f8b0:400e:c03::232]) by bombadil.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1ZyUaM-0004c6-26 for linux-mtd@lists.infradead.org; Tue, 17 Nov 2015 00:57:26 +0000 Received: by padhx2 with SMTP id hx2so192085963pad.1 for ; Mon, 16 Nov 2015 16:57:05 -0800 (PST) From: Brian Norris To: Cc: Brian Norris , Clay McClure , Ray Jui , Scott Branden , bcm-kernel-feedback-list@broadcom.com Subject: [PATCH] mtd: brcmnand: clean up flash cache for parameter pages Date: Mon, 16 Nov 2015 16:56:13 -0800 Message-Id: <1447721773-18417-1-git-send-email-computersforpeace@gmail.com> List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , The read_byte() handling for accessing the flash cache has some awkward swapping being done in the read_byte() function. Let's just make this a byte array, and do the swapping with the word-level macros during the initial buffer copy. This is just a refactoring patch, with no (intended) functional change. Signed-off-by: Brian Norris Cc: Clay McClure Cc: Ray Jui Cc: Scott Branden Cc: Tested-by: Clay McClure --- I wanted to get this out there as a proper patch, since there was some confusion on the previous thread in which this appeared. This does *not* fix the bug reported by Cyrille in the thread "mtd: brcmnand: Fix NAND_CMD_PARAM byte order". There is a candidate patch which fixes this: http://patchwork.ozlabs.org/patch/535330/ But I'm awaiting a better explanation from Broadcom folks before I respin/accept anything like that. drivers/mtd/nand/brcmnand/brcmnand.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/mtd/nand/brcmnand/brcmnand.c b/drivers/mtd/nand/brcmnand/brcmnand.c index 2a437c7ed175..0f43bc95ece4 100644 --- a/drivers/mtd/nand/brcmnand/brcmnand.c +++ b/drivers/mtd/nand/brcmnand/brcmnand.c @@ -134,7 +134,7 @@ struct brcmnand_controller { dma_addr_t dma_pa; /* in-memory cache of the FLASH_CACHE, used only for some commands */ - u32 flash_cache[FC_WORDS]; + u8 flash_cache[FC_BYTES]; /* Controller revision details */ const u16 *reg_offsets; @@ -1188,6 +1188,8 @@ static void brcmnand_cmdfunc(struct mtd_info *mtd, unsigned command, if (native_cmd == CMD_PARAMETER_READ || native_cmd == CMD_PARAMETER_CHANGE_COL) { + /* Copy flash cache word-wise */ + u32 *flash_cache = (u32 *)ctrl->flash_cache; int i; brcmnand_soc_data_bus_prepare(ctrl->soc); @@ -1197,7 +1199,11 @@ static void brcmnand_cmdfunc(struct mtd_info *mtd, unsigned command, * SECTOR_SIZE_1K may invalidate it */ for (i = 0; i < FC_WORDS; i++) - ctrl->flash_cache[i] = brcmnand_read_fc(ctrl, i); + /* + * Flash cache is big endian for parameter pages, at + * least on STB SoCs + */ + flash_cache[i] = be32_to_cpu(brcmnand_read_fc(ctrl, i)); brcmnand_soc_data_bus_unprepare(ctrl->soc); @@ -1250,8 +1256,7 @@ static uint8_t brcmnand_read_byte(struct mtd_info *mtd) if (host->last_byte > 0 && offs == 0) chip->cmdfunc(mtd, NAND_CMD_RNDOUT, addr, -1); - ret = ctrl->flash_cache[offs >> 2] >> - (24 - ((offs & 0x03) << 3)); + ret = ctrl->flash_cache[offs]; break; case NAND_CMD_GET_FEATURES: if (host->last_byte >= ONFI_SUBFEATURE_PARAM_LEN) { -- 2.6.0.rc2.230.g3dd15c0