From: tony@atomide.com (Tony Lindgren) Date: Thu, 3 Dec 2015 17:25:32 -0800 Subject: [PATCH 4/7] ARM: dts: Add mmc device entries for dm814x In-Reply-To: <1449192335-10137-1-git-send-email-tony@atomide.com> References: <1449192335-10137-1-git-send-email-tony@atomide.com> Message-ID: <1449192335-10137-5-git-send-email-tony@atomide.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Add mmc device entries for dm814x. Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dm814x.dtsi | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi index 9d81980e..18a8f0d 100644 --- a/arch/arm/boot/dts/dm814x.dtsi +++ b/arch/arm/boot/dts/dm814x.dtsi @@ -183,6 +183,28 @@ ti,hwmods = "timer3"; }; + mmc1: mmc at 60000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc1"; + dmas = <&edma 24 0 + &edma 25 0>; + dma-names = "tx", "rx"; + interrupts = <64>; + interrupt-parent = <&intc>; + reg = <0x60000 0x1000>; + }; + + mmc2: mmc at 1d8000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc2"; + dmas = <&edma 2 0 + &edma 3 0>; + dma-names = "tx", "rx"; + interrupts = <28>; + interrupt-parent = <&intc>; + reg = <0x1d8000 0x1000>; + }; + control: control at 140000 { compatible = "ti,dm814-scm", "simple-bus"; reg = <0x140000 0x20000>; @@ -279,6 +301,15 @@ reg = <0x48200000 0x1000>; }; + /* Board must configure evtmux with edma_xbar for EDMA */ + mmc3: mmc at 47810000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc3"; + interrupts = <29>; + interrupt-parent = <&intc>; + reg = <0x47810000 0x1000>; + }; + edma: edma at 49000000 { compatible = "ti,edma3-tpcc"; ti,hwmods = "tpcc"; -- 2.6.2