From: Helmut Buchsbaum Subject: [PATCH v3 6/6] dt-bindings: net: ks8995: add bindings documentation for ks8995 Date: Tue, 9 Feb 2016 20:47:18 +0100 Message-ID: <1455047238-111358-7-git-send-email-helmut.buchsbaum@gmail.com> References: <1455047238-111358-1-git-send-email-helmut.buchsbaum@gmail.com> Cc: netdev@vger.kernel.org, Helmut Buchsbaum To: "David S. Miller" , Florian Fainelli , Andrew Lunn , Sergei Shtylyov Return-path: Received: from mail-wm0-f67.google.com ([74.125.82.67]:34022 "EHLO mail-wm0-f67.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932478AbcBITrm (ORCPT ); Tue, 9 Feb 2016 14:47:42 -0500 Received: by mail-wm0-f67.google.com with SMTP id p63so5382810wmp.1 for ; Tue, 09 Feb 2016 11:47:41 -0800 (PST) In-Reply-To: <1455047238-111358-1-git-send-email-helmut.buchsbaum@gmail.com> Sender: netdev-owner@vger.kernel.org List-ID: Signed-off-by: Helmut Buchsbaum --- .../devicetree/bindings/net/micrel-ks8995.txt | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/micrel-ks8995.txt diff --git a/Documentation/devicetree/bindings/net/micrel-ks8995.txt b/Documentation/devicetree/bindings/net/micrel-ks8995.txt new file mode 100644 index 0000000..7f11ca6 --- /dev/null +++ b/Documentation/devicetree/bindings/net/micrel-ks8995.txt @@ -0,0 +1,20 @@ +Micrel KS8995 SPI controlled Ethernet Switch families + +Required properties (according to spi-bus.txt): +- compatible: either "micrel,ks8995", "micrel,ksz8864" or "micrel,ksz8795" + +Optional properties: +- reset-gpios : phandle of gpio that will be used to reset chip during probe + +Example: + +spi-master { + ... + switch@0 { + compatible = "micrel,ksz8795"; + + reg = <0>; + spi-max-frequency = <50000000>; + reset-gpios = <&gpio0 46 GPIO_ACTIVE_LOW>; + }; +}; -- 2.1.4