From: Takashi Iwai Subject: [PATCH] ALSA: hda - Fix unconditional GPIO toggle via automute Date: Tue, 15 Mar 2016 16:49:40 +0100 Message-ID: <1458056980-8792-1-git-send-email-tiwai@suse.de> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx2.suse.de (mx2.suse.de [195.135.220.15]) by alsa0.perex.cz (Postfix) with ESMTP id 612C02655A6 for ; Tue, 15 Mar 2016 16:49:42 +0100 (CET) Received: from relay2.suse.de (charybdis-ext.suse.de [195.135.220.254]) by mx2.suse.de (Postfix) with ESMTP id 984F9AB9D for ; Tue, 15 Mar 2016 15:49:41 +0000 (UTC) List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org Cirrus HD-audio driver may adjust GPIO pins for EAPD dynamically depending on the jack plug state. This works fine for the auto-mute mode where the speaker gets muted upon the HP jack plug. OTOH, when the auto-mute mode is off, this turns off the EAPD unexpectedly depending on the jack state, which results in the silent speaker output. This patch fixes the silent speaker output issue by setting GPIO bits constantly when the auto-mute mode is off. Reported-and-tested-by: moosotc@gmail.com Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_cirrus.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_cirrus.c b/sound/pci/hda/patch_cirrus.c index c1c855a6c0af..a47e8ae0eb30 100644 --- a/sound/pci/hda/patch_cirrus.c +++ b/sound/pci/hda/patch_cirrus.c @@ -174,8 +174,12 @@ static void cs_automute(struct hda_codec *codec) snd_hda_gen_update_outputs(codec); if (spec->gpio_eapd_hp || spec->gpio_eapd_speaker) { - spec->gpio_data = spec->gen.hp_jack_present ? - spec->gpio_eapd_hp : spec->gpio_eapd_speaker; + if (spec->gen.automute_speaker) + spec->gpio_data = spec->gen.hp_jack_present ? + spec->gpio_eapd_hp : spec->gpio_eapd_speaker; + else + spec->gpio_data = + spec->gpio_eapd_hp | spec->gpio_eapd_speaker; snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA, spec->gpio_data); } -- 2.7.3