From: Takashi Iwai Subject: [PATCH 2/7] ALSA: hda - Apply AMP fix in hdmi_setup_audio_infoframe() generically Date: Tue, 22 Mar 2016 12:29:28 +0100 Message-ID: <1458646173-14520-3-git-send-email-tiwai@suse.de> References: <1458646173-14520-1-git-send-email-tiwai@suse.de> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx2.suse.de (mx2.suse.de [195.135.220.15]) by alsa0.perex.cz (Postfix) with ESMTP id 453962658F0 for ; Tue, 22 Mar 2016 12:29:36 +0100 (CET) In-Reply-To: <1458646173-14520-1-git-send-email-tiwai@suse.de> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: alsa-devel@alsa-project.org Cc: libin.yang@linux.intel.com List-Id: alsa-devel@alsa-project.org The need for reprogramming the AMP mute bit at each audio info frame setup isn't always specific to Intel chips. It's safer to set it generically for all codecs with the amp bit, as this verb execution itself isn't too much load. This eliminates one usage of is_haswell_plus() macro, after all. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_hdmi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 48c63fea7018..fcd207d3ce7d 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -683,7 +683,8 @@ static void hdmi_setup_audio_infoframe(struct hda_codec *codec, if (!channels) return; - if (is_haswell_plus(codec)) + /* some HW (e.g. HSW+) needs reprogramming the amp at each time */ + if (get_wcaps(codec, pin_nid) & AC_WCAP_OUT_AMP) snd_hda_codec_write(codec, pin_nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE); -- 2.7.4