From: Bastien Nocera Subject: Re: [alsa-devel] Jack sensing in snd_usb_audio ? Date: Wed, 12 Oct 2016 17:30:53 +0200 Message-ID: <1476286253.6699.26.camel@hadess.net> References: <1476249011.6699.15.camel@hadess.net> <9449bd71-7766-5323-9fe8-30e954ca8f45@sakamocchi.jp> <1476269923.6699.20.camel@hadess.net> Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: Sender: linux-usb-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Clemens Ladisch Cc: Takashi Sakamoto , alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org, linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: alsa-devel@alsa-project.org On Wed, 2016-10-12 at 14:43 +0200, Clemens Ladisch wrote: > Bastien Nocera wrote: > > Looks like whether or not jack sensing works depends on the device > > itself, but there is a mechanism to propagate the change in setup > > in > > the USB Audio 2.0 spec > > > Some recent Windows 10 beta added partial support for USB Audio 2.0. > Earlier Windowses implement only USB Audio 1.0, which does not > mention > jacks. > > > " > > A change of state in the audio function is most often caused by a > > certain event that takes place. An event can either be user- > > initiated > > or device-initiated. User-initiated jack insertion or removal is a > > typical example of a user-initiated event. > > " > > > There are not many USB Audio 2.0 devices, and I'm not aware of any > that actually implements this. I guess I would see whether there areĀ events if I captured the USB traffic even without special handling/turning on a feature in the drivers, right? -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html