From: Charles Keepax Subject: [PATCH 1/2] ASoC: wm_adsp: Return an error on write to a disabled volatile control Date: Mon, 6 Mar 2017 16:54:33 +0000 Message-ID: <1488819274-9791-1-git-send-email-ckeepax@opensource.wolfsonmicro.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx0b-001ae601.pphosted.com (mx0a-001ae601.pphosted.com [67.231.149.25]) by alsa0.perex.cz (Postfix) with ESMTP id 5EBD6266DB3 for ; Mon, 6 Mar 2017 17:53:31 +0100 (CET) List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: broonie@kernel.org Cc: alsa-devel@alsa-project.org, patches@opensource.wolfsonmicro.com, lgirdwood@gmail.com List-Id: alsa-devel@alsa-project.org Volatile controls should only be accessed when the firmware is active, currently however writes to these controls will succeed, but the data will be lost, if the firmware is powered down. Update this behaviour such that an error is returned the same as it is for reads. Signed-off-by: Charles Keepax --- sound/soc/codecs/wm_adsp.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm_adsp.c b/sound/soc/codecs/wm_adsp.c index d151224..6313b3d 100644 --- a/sound/soc/codecs/wm_adsp.c +++ b/sound/soc/codecs/wm_adsp.c @@ -899,7 +899,10 @@ static int wm_coeff_put(struct snd_kcontrol *kctl, mutex_lock(&ctl->dsp->pwr_lock); - memcpy(ctl->cache, p, ctl->len); + if (ctl->flags & WMFW_CTL_FLAG_VOLATILE) + ret = -EPERM; + else + memcpy(ctl->cache, p, ctl->len); ctl->set = 1; if (ctl->enabled && ctl->dsp->running) @@ -926,6 +929,8 @@ static int wm_coeff_tlv_put(struct snd_kcontrol *kctl, ctl->set = 1; if (ctl->enabled && ctl->dsp->running) ret = wm_coeff_write_control(ctl, ctl->cache, size); + else if (ctl->flags & WMFW_CTL_FLAG_VOLATILE) + ret = -EPERM; } mutex_unlock(&ctl->dsp->pwr_lock); -- 2.1.4