From: Fabio Estevam Subject: [PATCH 1/2] ASoC: tas2552: Describe the possible I2C addresses Date: Tue, 11 Apr 2017 15:49:34 -0300 Message-ID: <1491936575-5780-1-git-send-email-fabio.estevam@nxp.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from NAM02-BL2-obe.outbound.protection.outlook.com (mail-bl2nam02on0089.outbound.protection.outlook.com [104.47.38.89]) by alsa0.perex.cz (Postfix) with ESMTP id 43D782666E1 for ; Tue, 11 Apr 2017 20:49:47 +0200 (CEST) List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: broonie@kernel.org Cc: Fabio Estevam , alsa-devel@alsa-project.org, dmurphy@ti.com List-Id: alsa-devel@alsa-project.org According to the TAS2552 datasheet the possible I2C addresses are: 0x40 - when ADDR pin is 0 0x41 - when ADDR pin is 1 List the possible values for better clarification. Signed-off-by: Fabio Estevam --- Documentation/devicetree/bindings/sound/tas2552.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/sound/tas2552.txt b/Documentation/devicetree/bindings/sound/tas2552.txt index 54c1c87..ea8abf0 100644 --- a/Documentation/devicetree/bindings/sound/tas2552.txt +++ b/Documentation/devicetree/bindings/sound/tas2552.txt @@ -5,7 +5,8 @@ The tas2552 serial control bus communicates through I2C protocols Required properties: - compatible - One of: "ti,tas2552" - TAS2552 - - reg - I2C slave address + - reg - I2C slave address: it can be 0x40 if ADDR pin is 0 + or 0x41 if ADDR pin is 1. - supply-*: Required supply regulators are: "vbat" battery voltage "iovdd" I/O Voltage -- 2.7.4