From: Fabio Estevam Subject: [PATCH 1/2] ASoC: fsl ssi doc: Move 'fsl, ssi-asynchronous' to the optional section Date: Wed, 12 Apr 2017 10:20:35 -0300 Message-ID: <1492003236-29690-1-git-send-email-fabio.estevam@nxp.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from NAM01-SN1-obe.outbound.protection.outlook.com (mail-sn1nam01on0053.outbound.protection.outlook.com [104.47.32.53]) by alsa0.perex.cz (Postfix) with ESMTP id 6609D2665D5 for ; Wed, 12 Apr 2017 15:20:45 +0200 (CEST) List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: broonie@kernel.org Cc: nicoleotsuka@gmail.com, Fabio Estevam , alsa-devel@alsa-project.org, timur@tabi.org List-Id: alsa-devel@alsa-project.org Property 'fsl,ssi-asynchronous' is optional, so move it to the optional section of the document. Signed-off-by: Fabio Estevam --- Documentation/devicetree/bindings/sound/fsl,ssi.txt | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/fsl,ssi.txt b/Documentation/devicetree/bindings/sound/fsl,ssi.txt index 5b76be4..1d292d7 100644 --- a/Documentation/devicetree/bindings/sound/fsl,ssi.txt +++ b/Documentation/devicetree/bindings/sound/fsl,ssi.txt @@ -28,16 +28,6 @@ Required properties: by SOC design. See the notes below. - fsl,fifo-depth: The number of elements in the transmit and receive FIFOs. This number is the maximum allowed value for SFCSR[TFWM0]. -- fsl,ssi-asynchronous: - If specified, the SSI is to be programmed in asynchronous - mode. In this mode, pins SRCK, STCK, SRFS, and STFS must - all be connected to valid signals. In synchronous mode, - SRCK and SRFS are ignored. Asynchronous mode allows - playback and capture to use different sample sizes and - sample rates. Some drivers may require that SRCK and STCK - be connected together, and SRFS and STFS be connected - together. This would still allow different sample sizes, - but not different sample rates. - clocks: "ipg" - Required clock for the SSI unit "baud" - Required clock for SSI master mode. Otherwise this clock is not used @@ -61,6 +51,16 @@ Optional properties: - fsl,mode: The operating mode for the AC97 interface only. "ac97-slave" - AC97 mode, SSI is clock slave "ac97-master" - AC97 mode, SSI is clock master +- fsl,ssi-asynchronous: + If specified, the SSI is to be programmed in asynchronous + mode. In this mode, pins SRCK, STCK, SRFS, and STFS must + all be connected to valid signals. In synchronous mode, + SRCK and SRFS are ignored. Asynchronous mode allows + playback and capture to use different sample sizes and + sample rates. Some drivers may require that SRCK and STCK + be connected together, and SRFS and STFS be connected + together. This would still allow different sample sizes, + but not different sample rates. Child 'codec' node required properties: - compatible: Compatible list, contains the name of the codec -- 2.7.4