From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= Date: Thu, 18 May 2017 21:29:40 +0200 Subject: [U-Boot] [PATCH 02/10] drivers: spi: add config to consider command bytes when writting to flash In-Reply-To: <1495135788-9152-1-git-send-email-noltari@gmail.com> References: <1495135788-9152-1-git-send-email-noltari@gmail.com> Message-ID: <1495135788-9152-3-git-send-email-noltari@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit To: u-boot@lists.denx.de Command bytes are part of the written bytes and they should be taken into account when sending a spi transfer. Signed-off-by: Álvaro Fernández Rojas --- drivers/mtd/spi/spi_flash.c | 2 +- drivers/spi/Kconfig | 3 +++ include/spi.h | 8 +++++++- 3 files changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c index e44c10f..748cc32 100644 --- a/drivers/mtd/spi/spi_flash.c +++ b/drivers/mtd/spi/spi_flash.c @@ -380,7 +380,7 @@ int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset, if (spi->max_write_size) chunk_len = min(chunk_len, - (size_t)spi->max_write_size); + spi_max_write(spi, sizeof(cmd))); spi_flash_addr(write_addr, cmd); diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index f3f7dbe..a00d401 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -13,6 +13,9 @@ config DM_SPI typically use driver-private data instead of extending the spi_slave structure. +config SPI_MAX_WRITE_CMD_BYTES + bool "Include command bytes when determining max write size" + if DM_SPI config ALTERA_SPI diff --git a/include/spi.h b/include/spi.h index 75a994c..310fa4d 100644 --- a/include/spi.h +++ b/include/spi.h @@ -63,6 +63,12 @@ struct dm_spi_slave_platdata { #endif /* CONFIG_DM_SPI */ +#ifdef CONFIG_SPI_MAX_WRITE_CMD_BYTES +#define spi_max_write(spi, len) (spi->max_write_size - len) +#else +#define spi_max_write(spi, len) (spi->max_write_size) +#endif + /** * struct spi_slave - Representation of a SPI slave * @@ -89,7 +95,7 @@ struct dm_spi_slave_platdata { * @max_read_size: If non-zero, the maximum number of bytes which can * be read at once. * @max_write_size: If non-zero, the maximum number of bytes which can - * be written at once, excluding command bytes. + * be written at once. * @memory_map: Address of read-only SPI flash access. * @flags: Indication of SPI flags. */ -- 2.1.4