From: Thomas Huth <thuth@redhat.com>
Date: Fri,  1 Sep 2017 09:19:51 +0200
Message-Id: <1504250391-6353-1-git-send-email-thuth@redhat.com>
Subject: [Qemu-devel] [qemu-web PATCH] Add a blog post about the release of
 version 2.10.0
To: qemu-devel@nongnu.org, pbonzini@redhat.com
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>

Using the contents of Micheal Roth's announce e-mail for this
blog post.

Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 _posts/2017-09-01-qemu-2-10-0.md | 56 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 56 insertions(+)
 create mode 100644 _posts/2017-09-01-qemu-2-10-0.md

diff --git a/_posts/2017-09-01-qemu-2-10-0.md b/_posts/2017-09-01-qemu-2-10-0.md
new file mode 100644
index 0000000..adb1c89
--- /dev/null
+++ b/_posts/2017-09-01-qemu-2-10-0.md
@@ -0,0 +1,56 @@
+---
+layout: post
+title:  "QEMU version 2.10.0 released"
+date:   2017-09-01 09:00:00 +0200
+categories: [releases, 'qemu 2.10']
+---
+You can grab the tarball from our
+[download page](http://www.qemu.org/download/#source).
+The full list of changes are available
+[in the Wiki](http://wiki.qemu.org/ChangeLog/2.10).
+
+Highlights include:
+ * Support for ACPI NUMA distance info and control over CPU NUMA
+   assignments via '-numa cpu' parameters
+ * Support for LUKS encryption format in qcow2 images
+ * Monitor/Management interface improvments: additional debug
+   information available through 'info ramblock/cmma/register/qtree',
+   support for viewing connected clients via 'info vnc', improved
+   parsing support for QMP protocol, and other additional commands
+ * QXL and virtio-gpu support for controlling default display resolution
+ * Support for vhost-user-scsi devices
+ * NVMe emulation support for Write Zeroes command and Controller
+   Memory Buffers
+ * Guest agent support for querying guest hostname, users, timezone, and
+   OS version/release information
+ * ARM: KVM support for Raspberry Pi 3
+ * ARM: emulation support for MPS2/MPS2+ FPGA-based dev boards
+ * ARM: zynq: SPIPS flash support
+ * ARM: exynos4210: hardware PRNG device, SDHCI, and system poweroff
+ * Microblaze: support for CPU versions 9.4, 9.5, 9.6, and 10.0
+ * MIPS: support for Enhanced Virtual Addressing (EVA)
+ * MIPS: initrd support for kaslr-enabled kernels
+ * OpenRISC: support for shadow registers, idle states, and
+   numcores/coreid/EVAR/EPH registers
+ * PowerPC: Multi-threaded TCG emulation support
+ * PowerPC: OpenBIOS VGA driver for MacOS guests
+ * PowerPC: pseries: KVM and emulation support for POWER9 guests
+ * PowerPC: pseries: support for hash page table resizing
+ * s390: channel device passthrough support via vfio-ccw
+ * s390: support for channel-attached 3270 "green screen" devices for
+   use as guest consoles or additional TTYs
+ * s390: improved support for PCI (AEN, AIS, and zPCI)
+ * s390: support for z14 CPU models and netboot/TFTP via CCW BIOS, 
+ * s390: TCG support for atomic "LOAD AND x" and "COMPARE SWAP"
+   operations, LOAD PROGRAM PARAMETER, extended facilities, CPU type,
+   and many more less-common instructions.
+ * SH: TCG support for host atomic instructions for emulating tas.b and
+   gUSA (user-space atomics), and support for fpchg/fsrra instructions
+ * SPARC: fixes for booting Solaris 2.6 on sun4m/OpenBIOS machines
+ * x86: Q35 MCH supports TSEG higher than 8MB
+ * x86: SSE register access via gdbstub
+ * Xen: support for multi-page shared rings, and 9pfs/virtfs backend
+ * Xtensa: sim machine console can be directed to chardev via -serial
+ * and lots more...
+
+Thank you to everyone involved!
-- 
1.8.3.1