Return-Path: Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=linux.vnet.ibm.com (client-ip=148.163.158.5; helo=mx0a-001b2d01.pphosted.com; envelope-from=eajames@linux.vnet.ibm.com; receiver=) Received: from mx0a-001b2d01.pphosted.com (mx0b-001b2d01.pphosted.com [148.163.158.5]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by lists.ozlabs.org (Postfix) with ESMTPS id 3zHbNW3BjZzF0hV for ; Fri, 12 Jan 2018 06:22:03 +1100 (AEDT) Received: from pps.filterd (m0098421.ppops.net [127.0.0.1]) by mx0a-001b2d01.pphosted.com (8.16.0.22/8.16.0.22) with SMTP id w0BJJOPn108244 for ; Thu, 11 Jan 2018 14:22:00 -0500 Received: from e32.co.us.ibm.com (e32.co.us.ibm.com [32.97.110.150]) by mx0a-001b2d01.pphosted.com with ESMTP id 2febg4f41u-1 (version=TLSv1.2 cipher=AES256-SHA bits=256 verify=NOT) for ; Thu, 11 Jan 2018 14:22:00 -0500 Received: from localhost by e32.co.us.ibm.com with IBM ESMTP SMTP Gateway: Authorized Use Only! Violators will be prosecuted for from ; Thu, 11 Jan 2018 12:21:59 -0700 Received: from b03cxnp08027.gho.boulder.ibm.com (9.17.130.19) by e32.co.us.ibm.com (192.168.1.132) with IBM ESMTP SMTP Gateway: Authorized Use Only! Violators will be prosecuted; Thu, 11 Jan 2018 12:21:58 -0700 Received: from b03ledav001.gho.boulder.ibm.com (b03ledav001.gho.boulder.ibm.com [9.17.130.232]) by b03cxnp08027.gho.boulder.ibm.com (8.14.9/8.14.9/NCO v10.0) with ESMTP id w0BJLwq710748222; Thu, 11 Jan 2018 12:21:58 -0700 Received: from b03ledav001.gho.boulder.ibm.com (unknown [127.0.0.1]) by IMSVA (Postfix) with ESMTP id 175FE6E040; Thu, 11 Jan 2018 12:21:58 -0700 (MST) Received: from talon7.ibm.com (unknown [9.41.241.240]) by b03ledav001.gho.boulder.ibm.com (Postfix) with ESMTP id C31C16E03A; Thu, 11 Jan 2018 12:21:57 -0700 (MST) From: Eddie James To: openbmc@lists.ozlabs.org Cc: joel@jms.id.au, Eddie James Subject: [PATCH linux dev-4.13 4/4] hwmon (pmbus): cffps: Add led class device for power supply fault led Date: Thu, 11 Jan 2018 13:21:50 -0600 X-Mailer: git-send-email 1.8.3.1 In-Reply-To: <1515698510-16619-1-git-send-email-eajames@linux.vnet.ibm.com> References: <1515698510-16619-1-git-send-email-eajames@linux.vnet.ibm.com> X-TM-AS-GCONF: 00 x-cbid: 18011119-0004-0000-0000-0000138139E0 X-IBM-SpamModules-Scores: X-IBM-SpamModules-Versions: BY=3.00008361; HX=3.00000241; KW=3.00000007; PH=3.00000004; SC=3.00000245; SDB=6.00973578; UDB=6.00493317; IPR=6.00753522; BA=6.00005773; NDR=6.00000001; ZLA=6.00000005; ZF=6.00000009; ZB=6.00000000; ZP=6.00000000; ZH=6.00000000; ZU=6.00000002; MB=3.00018983; XFM=3.00000015; UTC=2018-01-11 19:21:59 X-IBM-AV-DETECTION: SAVI=unused REMOTE=unused XFE=unused x-cbparentid: 18011119-0005-0000-0000-0000859EFBD3 Message-Id: <1515698510-16619-5-git-send-email-eajames@linux.vnet.ibm.com> X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10432:, , definitions=2018-01-11_06:, , signatures=0 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 priorityscore=1501 malwarescore=0 suspectscore=1 phishscore=0 bulkscore=0 spamscore=0 clxscore=1015 lowpriorityscore=0 impostorscore=0 adultscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.0.1-1709140000 definitions=main-1801110264 X-BeenThere: openbmc@lists.ozlabs.org X-Mailman-Version: 2.1.24 Precedence: list List-Id: Development list for OpenBMC List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 11 Jan 2018 19:22:03 -0000 This power supply device doesn't correctly manage it's own fault led. Add an led class device and register it so that userspace can manage power supply fault led as necessary. Signed-off-by: Eddie James --- drivers/hwmon/pmbus/ibm-cffps.c | 96 +++++++++++++++++++++++++++++++++++++---- 1 file changed, 88 insertions(+), 8 deletions(-) diff --git a/drivers/hwmon/pmbus/ibm-cffps.c b/drivers/hwmon/pmbus/ibm-cffps.c index 2d6f4f4..93d9a9e 100644 --- a/drivers/hwmon/pmbus/ibm-cffps.c +++ b/drivers/hwmon/pmbus/ibm-cffps.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include #include @@ -25,6 +26,7 @@ #define CFFPS_CCIN_CMD 0xBD #define CFFPS_FW_CMD_START 0xFA #define CFFPS_FW_NUM_BYTES 4 +#define CFFPS_SYS_CONFIG_CMD 0xDA #define CFFPS_INPUT_HISTORY_CMD 0xD6 #define CFFPS_INPUT_HISTORY_SIZE 100 @@ -39,6 +41,11 @@ #define CFFPS_MFR_VAUX_FAULT BIT(6) #define CFFPS_MFR_CURRENT_SHARE_WARNING BIT(7) +#define CFFPS_LED_BLINK BIT(0) +#define CFFPS_LED_ON BIT(1) +#define CFFPS_LED_OFF BIT(2) +#define CFFPS_BLINK_RATE_MS 250 + enum { CFFPS_DEBUGFS_INPUT_HISTORY = 0, CFFPS_DEBUGFS_FRU, @@ -63,6 +70,10 @@ struct ibm_cffps { struct ibm_cffps_input_history input_history; int debugfs_entries[CFFPS_DEBUGFS_NUM_ENTRIES]; + + char led_name[32]; + u8 led_state; + struct led_classdev led; }; #define to_psu(x, y) container_of((x), struct ibm_cffps, debugfs_entries[(y)]) @@ -258,6 +269,69 @@ static int ibm_cffps_read_word_data(struct i2c_client *client, int page, return rc; } +static void ibm_cffps_led_brightness_set(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + int rc; + struct ibm_cffps *psu = container_of(led_cdev, struct ibm_cffps, led); + + if (brightness == LED_OFF) { + psu->led_state = CFFPS_LED_OFF; + } else { + brightness = LED_FULL; + if (psu->led_state != CFFPS_LED_BLINK) + psu->led_state = CFFPS_LED_ON; + } + + rc = i2c_smbus_write_byte_data(psu->client, CFFPS_SYS_CONFIG_CMD, + psu->led_state); + if (rc < 0) + return; + + led_cdev->brightness = brightness; +} + +static int ibm_cffps_led_blink_set(struct led_classdev *led_cdev, + unsigned long *delay_on, + unsigned long *delay_off) +{ + int rc; + struct ibm_cffps *psu = container_of(led_cdev, struct ibm_cffps, led); + + psu->led_state = CFFPS_LED_BLINK; + + if (led_cdev->brightness == LED_OFF) + return 0; + + rc = i2c_smbus_write_byte_data(psu->client, CFFPS_SYS_CONFIG_CMD, + CFFPS_LED_BLINK); + if (rc < 0) + return rc; + + *delay_on = CFFPS_BLINK_RATE_MS; + *delay_off = CFFPS_BLINK_RATE_MS; + + return 0; +} + +static void ibm_cffps_create_led_class(struct ibm_cffps *psu) +{ + int rc; + struct i2c_client *client = psu->client; + struct device *dev = &client->dev; + + snprintf(psu->led_name, sizeof(psu->led_name), "%s-%02x", client->name, + client->addr); + psu->led.name = psu->led_name; + psu->led.max_brightness = LED_FULL; + psu->led.brightness_set = ibm_cffps_led_brightness_set; + psu->led.blink_set = ibm_cffps_led_blink_set; + + rc = devm_led_classdev_register(dev, &psu->led); + if (rc) + dev_warn(dev, "failed to register led class: %d\n", rc); +} + static struct pmbus_driver_info ibm_cffps_info = { .pages = 1, .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT | @@ -286,6 +360,20 @@ static int ibm_cffps_probe(struct i2c_client *client, if (rc) return rc; + /* + * Don't fail the probe if there isn't enough memory for leds and + * debugfs. + */ + psu = devm_kzalloc(&client->dev, sizeof(*psu), GFP_KERNEL); + if (!psu) + return 0; + + psu->client = client; + mutex_init(&psu->input_history.update_lock); + psu->input_history.last_update = jiffies - HZ; + + ibm_cffps_create_led_class(psu); + /* Don't fail the probe if we can't create debugfs */ debugfs = pmbus_get_debugfs_dir(client); if (!debugfs) @@ -295,14 +383,6 @@ static int ibm_cffps_probe(struct i2c_client *client, if (!ibm_cffps_dir) return 0; - psu = devm_kzalloc(&client->dev, sizeof(*psu), GFP_KERNEL); - if (!psu) - return 0; - - psu->client = client; - mutex_init(&psu->input_history.update_lock); - psu->input_history.last_update = jiffies - HZ; - for (i = 0; i < CFFPS_DEBUGFS_NUM_ENTRIES; ++i) psu->debugfs_entries[i] = i; -- 1.8.3.1