From: Jagan Teki Date: Wed, 7 Feb 2018 21:33:22 +0530 Subject: [U-Boot] [PATCH v3 2/2] arm: i.MX: Add CMD_NANDBCB Kconfig entry In-Reply-To: <1518019402-29979-1-git-send-email-jagan@amarulasolutions.com> References: <1518019402-29979-1-git-send-email-jagan@amarulasolutions.com> Message-ID: <1518019402-29979-2-git-send-email-jagan@amarulasolutions.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Add Kconfig entry for CMD_NANDBCB, and default y on i.MX6 platform with NAND_MXS defined. Signed-off-by: Jagan Teki --- Changes for v3: - Fixed Typo 'seprate' Changes for v2: - New patch arch/arm/mach-imx/Kconfig | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 3aec89d..1b9c275 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -71,6 +71,17 @@ config CMD_HDMIDETECT This enables the 'hdmidet' command which detects if an HDMI monitor is connected. +config CMD_NANDBCB + bool "i.MX6 NAND Boot Control Block(BCB) command" + depends on NAND && CMD_MTDPARTS + default y if ARCH_MX6 && NAND_MXS + help + Unlike normal 'nand write/erase' commands, this command update + Boot Control Block(BCB) for i.MX6 platform NAND IP's. + + This is similar to kobs-ng, which is used in Linux as separate + rootfs package. + config NXP_BOARD_REVISION bool "Read NXP board revision from fuses" depends on ARCH_MX6 || ARCH_MX7 -- 2.7.4