From: make at marvell.com Date: Mon, 26 Mar 2018 15:55:57 +0800 Subject: [U-Boot] [PATCH 03/13] arm64: a37xx: dts: Add pinctrl configuration for ESPRESSOBin board In-Reply-To: <1522050967-24749-1-git-send-email-make@marvell.com> References: <1522050967-24749-1-git-send-email-make@marvell.com> Message-ID: <1522050967-24749-4-git-send-email-make@marvell.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de From: Ken Ma Reviewed-on: http://vgitil04.il.marvell.com:8080/40913 Reviewed-by: Wilson Ding Tested-by: Wilson Ding Cc: Simon Glass Cc: Stefan Roese Signed-off-by: Ken Ma --- arch/arm/dts/armada-3720-espressobin.dts | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/dts/armada-3720-espressobin.dts b/arch/arm/dts/armada-3720-espressobin.dts index aa6587a..5d8d27e 100644 --- a/arch/arm/dts/armada-3720-espressobin.dts +++ b/arch/arm/dts/armada-3720-espressobin.dts @@ -89,6 +89,8 @@ ð0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; phy-mode = "rgmii"; phy_addr = <0x1>; fixed-link { @@ -98,6 +100,8 @@ }; &i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; status = "okay"; }; @@ -108,6 +112,8 @@ &spi0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi_quad_pins>; spi-flash at 0 { #address-cells = <1>; @@ -121,6 +127,8 @@ /* Exported on the micro USB connector CON32 through an FTDI */ &uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; status = "okay"; }; -- 1.9.1