Return-Path: From: Wang Mingyu Date: Wed, 31 Oct 2018 01:44:05 -0700 Message-ID: <1540975446-17301-5-git-send-email-wangmy@cn.fujitsu.com> In-Reply-To: <1540975446-17301-1-git-send-email-wangmy@cn.fujitsu.com> References: <1540975446-17301-1-git-send-email-wangmy@cn.fujitsu.com> MIME-Version: 1.0 Content-Type: text/plain Subject: [Fuego] [PATCH] Add test cases of command samhain. List-Id: Mailing list for the Fuego test framework List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: fuego@lists.linuxfoundation.org Signed-off-by: Wang Mingyu --- engine/tests/Functional.samhain/data/samhainrc | 773 +++++++++++++++++++++ engine/tests/Functional.samhain/fuego_test.sh | 19 + engine/tests/Functional.samhain/parser.py | 22 + engine/tests/Functional.samhain/samhain_test.sh | 4 + engine/tests/Functional.samhain/spec.json | 7 + .../Functional.samhain/tests/samhain_check.sh | 58 ++ .../tests/Functional.samhain/tests/samhain_help.sh | 13 + .../tests/Functional.samhain/tests/samhain_init.sh | 42 ++ 8 files changed, 938 insertions(+) create mode 100755 engine/tests/Functional.samhain/data/samhainrc create mode 100644 engine/tests/Functional.samhain/fuego_test.sh create mode 100644 engine/tests/Functional.samhain/parser.py create mode 100755 engine/tests/Functional.samhain/samhain_test.sh create mode 100644 engine/tests/Functional.samhain/spec.json create mode 100644 engine/tests/Functional.samhain/tests/samhain_check.sh create mode 100644 engine/tests/Functional.samhain/tests/samhain_help.sh create mode 100644 engine/tests/Functional.samhain/tests/samhain_init.sh diff --git a/engine/tests/Functional.samhain/data/samhainrc b/engine/tests/Functional.samhain/data/samhainrc new file mode 100755 index 0000000..e90926d --- /dev/null +++ b/engine/tests/Functional.samhain/data/samhainrc @@ -0,0 +1,773 @@ +##################################################################### +# +# Configuration file template for samhain. +# +##################################################################### +# +# -- empty lines and lines starting with '#', ';' or '//' are ignored +# -- boolean options can be Yes/No or True/False or 1/0 +# -- you can PGP clearsign this file -- samhain will check (if compiled +# with support) or otherwise ignore the signature +# -- CHECK mail address +# +# To each log facility, you can assign a threshold severity. Only +# reports with at least the threshold severity will be logged +# to the respective facility (even further below). +# +##################################################################### +# +# SETUP for file system checking: +# +# (i) There are several policies, each has its own section. Put files +# into the section for the appropriate policy (see below). +# (ii) Section [EventSeverity]: +# To each policy, you can assign a severity (further below). +# (iii) Section [Log]: +# To each log facility, you can assign a threshold severity. Only +# reports with at least the threshold severity will be logged +# to the respective facility (even further below). +# +##################################################################### + +##################################################################### +# +# Files are defined with: file = /absolute/path +# +# Directories are defined with: dir = /absolute/path +# or with an optional recursion depth (N <= 99): dir = N/absolute/path +# +# Directory inodes are checked. If you only want to check files +# in a directory, but not the directory inode itself, use (e.g.): +# +# [ReadOnly] +# dir = /some/directory +# [IgnoreAll] +# file = /some/directory +# +# You can use shell-style globbing patterns, like: file = /path/foo* +# +###################################################################### + +[Misc] +## +## Add or subtract tests from the policies +## - if you want to change their definitions, +## you need to do that before using the policies +## +# RedefReadOnly = (no default) +# RedefAttributes=(no default) +# RedefLogFiles=(no default) +# RedefGrowingLogFiles=(no default) +# RedefIgnoreAll=(no default) +# RedefIgnoreNone=(no default) + +# RedefUser0=(no default) +# RedefUser1=(no default) + +# +# --------- / -------------- +# + +[ReadOnly] +#dir = 0/ + +[Attributes] +file = /tmp +file = /dev +file = /media +file = /proc +file = /sys + +# +# --------- /etc ----------- +# + +[ReadOnly] +## +## for these files, only access time is ignored +## +#dir = 99/etc + +[Attributes] +## +## check permission and ownership +## +#file = /etc/mtab +#file = /etc/adjtime +#file = /etc/motd +#file = /etc/lvm/.cache + +# On Ubuntu, these are in /var/lib rather than /etc +#file = /etc/cups/certs +#file = /etc/cups/certs/0 + +# managed by fstab-sync on Fedora Core +#file = /etc/fstab + +# modified when booting +#file = /etc/sysconfig/hwconf + +# There are files in /etc that might change, thus changing the directory +# timestamps. Put it here as 'file', and in the ReadOnly section as 'dir'. + +#file = /etc + +# +# --------- /boot ----------- +# + +[ReadOnly] +#dir = 99/boot + +# +# --------- /bin, /sbin ----------- +# + +[ReadOnly] +#dir = 99/bin +#dir = 99/sbin + +# +# --------- /lib ----------- +# + +[ReadOnly] +#dir = 99/lib + +# +# --------- /dev ----------- +# + +[Attributes] +#dir = 99/dev + +[IgnoreAll] +## +## pseudo terminals are created/removed as needed +## +#dir = -1/dev/pts + +# dir = -1/dev/.udevdb + +#file = /dev/ppp + +# +# --------- /usr ----------- +# + +[ReadOnly] +#dir = 99/usr + +[ReadOnly] +dir = 99$BOARD_TESTDIR/fuego.$TESTDIR/test_dir/samhain_test + +# +# --------- /var ----------- +# + +[ReadOnly] +#dir = 99/var + +[IgnoreAll] +dir = -1/var/cache +dir = -1/var/backups +dir = -1/var/games +dir = -1/var/gdm +dir = -1/var/lock +dir = -1/var/mail +dir = -1/var/run +dir = -1/var/spool +dir = -1/var/tmp +dir = -1/var/lib/texmf +dir = -1/var/lib/scrollkeeper + + +[Attributes] + +dir = /var/lib/nfs +dir = /var/lib/pcmcia + +# /var/lib/rpm changes if packets are installed; +# /var/lib/rpm/__db.00[123] even more frequently +file = /var/lib/rpm/__db.00? + +file = /var/lib/acpi-support/vbestate +file = /var/lib/alsa/asound.state +file = /var/lib/apt/lists/lock +file = /var/lib/apt/lists/partial +file = /var/lib/cups/certs +file = /var/lib/cups/certs/0 +file = /var/lib/dpkg/lock +file = /var/lib/gdm +file = /var/lib/gdm/.cookie +file = /var/lib/gdm/.gdmfifo +file = /var/lib/gdm/:0.Xauth +file = /var/lib/gdm/:0.Xservers +file = /var/lib/logrotate/status +file = /var/lib/mysql +file = /var/lib/mysql/ib_logfile0 +file = /var/lib/mysql/ibdata1 +file = /var/lib/slocate +file = /var/lib/slocate/slocate.db +file = /var/lib/slocate/slocate.db.tmp +file = /var/lib/urandom +file = /var/lib/urandom/random-seed +file = /var/lib/random-seed +file = /var/lib/xkb + + +[GrowingLogFiles] +## +## For these files, changes in signature, timestamps, and increase in size +## are ignored. Logfile rotation will cause a report because of shrinking +## size and different inode. +## +#dir = 99/var/log + +[Attributes] +# +# rotated logs will change inode +# +#file = /var/log/*.[0-9].gz +#file = /var/log/*.[0-9].log +#file = /var/log/*.[0-9] +#file = /var/log/*.old +#file = /var/log/*/*.[0-9].gz +#file = /var/log/*/*.[0-9][0-9].gz +#file = /var/log/*/*.log.[0-9] + +[Misc] +# +# Various naming schemes for rotated logs +# +IgnoreAdded = /var/log/.*\.[0-9]+$ +IgnoreAdded = /var/log/.*\.[0-9]+\.gz$ +IgnoreAdded = /var/log/.*\.[0-9]+\.log$ +# +# Subdirectories +# +IgnoreAdded = /var/log/[[:alnum:]]+/.*\.[0-9]+$ +IgnoreAdded = /var/log/[[:alnum:]]+/.*\.[0-9]+\.gz$ +IgnoreAdded = /var/log/[[:alnum:]]+/.*\.[0-9]+\.log$ +# +IgnoreAdded = /var/lib/slocate/slocate.db.tmp +IgnoreMissing = /var/lib/slocate/slocate.db.tmp + +# +# --------- other policies ----------- +# + +[IgnoreNone] +## +## for these files, all modifications (even access time) are reported +## - you may create some interesting-looking file (like /etc/safe_passwd), +## just to watch whether someone will access it ... +## + +[Prelink] +## +## Use for prelinked files or directories holding them +## + + +[User0] +[User1] +## User0 and User1 are sections for files/dirs with user-definable checking +## (see the manual) + + + +[EventSeverity] +## +## Here you can assign severities to policy violations. +## If this severity exceeds the treshold of a log facility (see below), +## a policy violation will be logged to that facility. +## +## Severity for verification failures. +## +# SeverityReadOnly=crit +# SeverityLogFiles=crit +# SeverityGrowingLogs=crit +# SeverityIgnoreNone=crit +# SeverityAttributes=crit +# SeverityUser0=crit +# SeverityUser1=crit +# SeverityIgnoreAll=crit + + +## Files : file access problems +# SeverityFiles=crit + +## Dirs : directory access problems +# SeverityDirs=crit + +## Names : suspect (non-printable) characters in a pathname +# SeverityNames=crit + +[Log] +## +## Switch on/OFF log facilities and set their threshold severity +## +## Values: debug, info, notice, warn, mark, err, crit, alert, none. +## 'mark' is used for timestamps. +## +## +## Use 'none' to SWITCH OFF a log facility +## +## By default, everything equal to and above the threshold is logged. +## The specifiers '*', '!', and '=' are interpreted as +## 'all', 'all but', and 'only', respectively (like syslogd(8) does, +## at least on Linux). Examples: +## MailSeverity=* +## MailSeverity=!warn +## MailSeverity==crit + +## E-mail +## +# MailSeverity=none + +## Console +## +# PrintSeverity=info + +## Logfile +## +# LogSeverity=mark + +## Syslog +## +# SyslogSeverity=none + +## Remote server (yule) +## +# ExportSeverity=none + +## External script or program +## +# ExternalSeverity = none + +## Logging to a database +## +# DatabaseSeverity = none + +## Logging to a Prelude-IDS +## +# PreludeSeverity = crit + + + +##################################################### +# +# Optional modules +# +##################################################### + +# [SuidCheck] +## +## --- Check the filesystem for SUID/SGID binaries +## + +## Switch on +# +# SuidCheckActive = yes + +## Interval for check (seconds) +# +# SuidCheckInterval = 7200 + +## Alternative: crontab-like schedule +# +# SuidCheckSchedule = NULL + +## Directory to exclude +# +# SuidCheckExclude = NULL + +## Limit on files per second (0 == no limit) +# +# SuidCheckFps = 0 + +## Alternative: yield after every file +# +# SuidCheckYield = no + +## Severity of a detection +# +# SeveritySuidCheck = crit + +## Quarantine SUID/SGID files if found +# +# SuidCheckQuarantineFiles = yes + +## Method for Quarantining files: +# 0 - Delete or truncate the file. +# 1 - Remove SUID/SGID permissions from file. +# 2 - Move SUID/SGID file to quarantine dir. +# +# SuidCheckQuarantineMethod = 0 + +## For method 1 and 3, really delete instead of truncating +# +# SuidCheckQuarantineDelete = yes + +#[Kernel] +## +## --- Check for loadable kernel module rootkits (Linux/FreeBSD only) +## + +## Switch on/off +# +# KernelCheckActive = True + +## Check interval (seconds); btw., the check is VERY fast +# +# KernelCheckInterval = 300 + +## Severity +# +# SeverityKernel = crit + + +# [Utmp] +## +## --- Logging of login/logout events +## + +## Switch on/off +# +# LoginCheckActive = True + +## Severity for logins, multiple logins, logouts +# +# SeverityLogin=info +# SeverityLoginMulti=warn +# SeverityLogout=info + +## Interval for login/logout checks +# +# LoginCheckInterval = 300 + + +# [Database] +## +## --- Logging to a relational database +## + +## Database name +# +# SetDBName = samhain + +## Database table +# +# SetDBTable = log + +## Database user +# +# SetDBUser = samhain + +## Database password +# +# SetDBPassword = (default: none) + +## Database host +# +# SetDBHost = localhost + +## Log the server timestamp for received messages +# +# SetDBServerTstamp = True + +## Use a persistent connection +# +# UsePersistent = True + +# [External] +## +## Interface to call external scripts/programs for logging +## + +## The absolute path to the command +## - Each invocation of this directive will end the definition of the +## preceding command, and start the definition of +## an additional, new command +# +# OpenCommand = (no default) + +## Type (log or rv) +## - log for log messages, srv for messages received by the server +# +# SetType = log + +## The command (full command line) to execute +# +# SetCommandLine = (no default) + +## The environment (KEY=value; repeat for more) +# +# SetEnviron = TZ=(your timezone) + +## The TIGER192 checksum (optional) +# +# SetChecksum = (no default) + +## User who runs the command +# +# SetCredentials = (default: samhain process uid) + +## Words not allowed in message +# +# SetFilterNot = (none) + +## Words required (ALL of them) +# +# SetFilterAnd = (none) + +## Words required (at least one) +# +# SetFilterOr = (none) + +## Deadtime between consecutive calls +# +# SetDeadtime = 0 + +## Add default environment (HOME, PATH, SHELL) +# +# SetDefault = no + + +##################################################### +# +# Miscellaneous configuration options +# +##################################################### + +[Misc] + +## whether to become a daemon process +## (this is not honoured on database initialisation) +# +# Daemon = no +Daemon = yes + +## whether to test signature of files (init/check/none) +## - if 'none', then we have to decide this on the command line - +# +# ChecksumTest = none +ChecksumTest=check + +## Set nice level (-19 to 19, see 'man nice'), +## and I/O limit (kilobytes per second; 0 == off) +## to reduce load on host. +# +# SetNiceLevel = 0 +# SetIOLimit = 0 + +## The version string to embed in file signature databases +# +# VersionString = NULL + +## Interval between time stamp messages +# +# SetLoopTime = 60 +SetLoopTime = 600 + +## Interval between file checks +# +# SetFileCheckTime = 600 +SetFileCheckTime = 7200 + +## Alternative: crontab-like schedule +# +# FileCheckScheduleOne = NULL + +## Alternative: crontab-like schedule(2) +# +# FileCheckScheduleTwo = NULL + +## Report only once on modified files +## Setting this to 'FALSE' will generate a report for any policy +## violation (old and new ones) each time the daemon checks the file system. +# +# ReportOnlyOnce = True + +## Report in full detail +# +# ReportFullDetail = False + +## Report file timestamps in local time rather than GMT +# +# UseLocalTime = No + +## The console device (can also be a file or named pipe) +## - There are two console devices. Accordingly, you can use +## this directive a second time to set the second console device. +## If you have not defined the second device at compile time, +## and you don't want to use it, then: +## setting it to /dev/null is less effective than just leaving +## it alone (setting to /dev/null will waste time by opening +## /dev/null and writing to it) +# +# SetConsole = /dev/console + +## Activate the SysV IPC message queue +# +# MessageQueueActive = False + + +## If false, skip reverse lookup when connecting to a host known +## by name rather than IP address (i.e. trust the DNS) +# +# SetReverseLookup = True + +## --- E-Mail --- + +# Only highest-level (alert) reports will be mailed immediately, +# others will be queued. Here you can define, when the queue will +# be flushed (Note: the queue is automatically flushed after +# completing a file check). +# +# SetMailTime = 86400 + +## Maximum number of mails to queue +# +# SetMailNum = 10 + +## Recipient (max. 8) +# +# SetMailAddress=root@localhost + +## Mail relay (IP address) +# +# SetMailRelay = NULL + +## Custom subject format +# +# MailSubject = NULL + +## --- end E-Mail --- + +## Path to the prelink executable +# +# SetPrelinkPath = /usr/sbin/prelink + +## TIGER192 checksum of the prelink executable +# +# SetPrelinkChecksum = (no default) + + +## Path to the executable. If set, will be checksummed after startup +## and before exit. +# +# SamhainPath = (no default) + + +## The IP address of the log server +# +# SetLogServer = (default: compiled-in) + +## The IP address of the time server +# +# SetTimeServer = (default: compiled-in) + +## Trusted Users (comma delimited list of user names) +# +# TrustedUser = (no default; this adds to the compiled-in list) + +## Path to the file signature database +# +# SetDatabasePath = (default: compiled-in) + +## Path to the log file +# +# SetLogfilePath = (default: compiled-in) + +## Path to the PID file +# +# SetLockPath = (default: compiled-in) + + +## The digest/checksum/hash algorithm +# +# DigestAlgo = TIGER192 + + +## Custom format for message header. +## CAREFUL if you use XML logfile format. +## +## %S severity +## %T timestamp +## %C class +## +## %F source file +## %L source line +# +# MessageHeader="%S %T " + + +## Don't log path to config/database file on startup +# +# HideSetup = False + +## The syslog facility, if you log to syslog +# +# SyslogFacility = LOG_AUTHPRIV +SyslogFacility=LOG_LOCAL2 + +## The message authentication method +## - If you change this, you *must* change it +## on client *and* server +# +# MACType = HMAC-TIGER + + +## The Prelude-IDS profile to use for reporting +## default value is "samhain" +# +# PreludeProfile = samhain + +## Map these samhain severities to impact severity 'info' severity +# +# PreludeMapToInfo = + +## Map these samhain severities to impact severity 'low' severity +# +# PreludeMapToLow = debug info + +## Map these samhain severities to impact severity 'medium' severity +# +# PreludeMapToMedium = notice warn err + +## Map these samhain severities to impact severity 'high' severity +# +# PreludeMapToHigh = crit alert + + +## everything below is ignored +[EOF] + +##################################################################### +# This would be the proper syntax for parts that should only be +# included for certain hosts. +# You may enclose anything in a @HOSTNAME/@end bracket, as long as the +# result still has the proper syntax for the config file. +# You may have any number of @HOSTNAME/@end brackets. +# HOSTNAME should be the fully qualified 'official' name +# (e.g. 'nixon.watergate.com', not 'nixon'), no aliases. +# No IP number - except if samhain cannot determine the +# fully qualified hostname. +# +# @HOSTNAME +# file=/foo/bar +# @end +# +# These are two examples for conditional inclusion/exclusion +# of a machine based on the output from 'uname -srm' +# $Linux:2.*.7:i666 +# file=/foo/bar3 +# $end +# +# !$Linux:2.*.7:i686 +# file=/foo/bar2 +# $end +# +##################################################################### diff --git a/engine/tests/Functional.samhain/fuego_test.sh b/engine/tests/Functional.samhain/fuego_test.sh new file mode 100644 index 0000000..dddf5ad --- /dev/null +++ b/engine/tests/Functional.samhain/fuego_test.sh @@ -0,0 +1,19 @@ +function test_pre_check { + is_on_target_path samhain PROGRAM_SAMHAIN + assert_define PROGRAM_SAMHAIN "Missing 'samhain' program on target board" +} + +function test_deploy { + put $TEST_HOME/samhain_test.sh $BOARD_TESTDIR/fuego.$TESTDIR/ + put -r $TEST_HOME/tests $BOARD_TESTDIR/fuego.$TESTDIR/ + put -r $TEST_HOME/data $BOARD_TESTDIR/fuego.$TESTDIR/ +} + +function test_run { + report "cd $BOARD_TESTDIR/fuego.$TESTDIR;\ + ./samhain_test.sh" +} + +function test_processing { + log_compare "$TESTDIR" "0" "TEST-FAIL" "n" +} diff --git a/engine/tests/Functional.samhain/parser.py b/engine/tests/Functional.samhain/parser.py new file mode 100644 index 0000000..d85abd7 --- /dev/null +++ b/engine/tests/Functional.samhain/parser.py @@ -0,0 +1,22 @@ +#!/usr/bin/python +# See common.py for description of command-line arguments + +import os, sys, collections + +sys.path.insert(0, os.environ['FUEGO_CORE'] + '/engine/scripts/parser') +import common as plib + +measurements = {} +measurements = collections.OrderedDict() + +regex_string = '^ -> (.*): TEST-(.*)$' +matches = plib.parse_log(regex_string) + +if matches: + for m in matches: + measurements['default.' + m[0]] = 'PASS' if m[1] == 'PASS' else 'FAIL' + +# split the output for each testcase +plib.split_output_per_testcase(regex_string, measurements) + +sys.exit(plib.process(measurements)) diff --git a/engine/tests/Functional.samhain/samhain_test.sh b/engine/tests/Functional.samhain/samhain_test.sh new file mode 100755 index 0000000..dd5ce37 --- /dev/null +++ b/engine/tests/Functional.samhain/samhain_test.sh @@ -0,0 +1,4 @@ +#!/bin/sh +for i in tests/*.sh; do + sh $i +done diff --git a/engine/tests/Functional.samhain/spec.json b/engine/tests/Functional.samhain/spec.json new file mode 100644 index 0000000..5e2f023 --- /dev/null +++ b/engine/tests/Functional.samhain/spec.json @@ -0,0 +1,7 @@ +{ + "testName": "Functional.samhain", + "specs": { + "default": {} + } +} + diff --git a/engine/tests/Functional.samhain/tests/samhain_check.sh b/engine/tests/Functional.samhain/tests/samhain_check.sh new file mode 100644 index 0000000..312466d --- /dev/null +++ b/engine/tests/Functional.samhain/tests/samhain_check.sh @@ -0,0 +1,58 @@ +#!/bin/sh + +# In target, run command samhain. +# option: -t + +test="check" + +umount /media/sda2 > /dev/null 2>&1 +umount /media/sda3 > /dev/null 2>&1 +umount /media/sda4 > /dev/null 2>&1 +umount /media/sda5 > /dev/null 2>&1 +umount /media/sda6 > /dev/null 2>&1 +umount /media/sda7 > /dev/null 2>&1 +umount /media/sda8 > /dev/null 2>&1 +umount /media/sda9 > /dev/null 2>&1 + +mv /etc/samhainrc /etc/samhainrc_bak +cp data/samhainrc /etc/samhainrc + +chown root.root /etc/samhainrc + +rm -fr /var/samhain/* +rm -f /var/log/samhain_log + +sleep 1 + +mkdir -p test_dir/samhain_test/ +touch test_dir/samhain_test/test.txt + +samhain -t init -p info > /dev/null 2&> 1 + +sleep 1 + +echo test > test_dir/samhain_test/test.txt + +sleep 1 + +if samhain -t check +then + echo " -> samhain -t check succeeded." +else + echo " -> $test: TEST-FAIL" + rm -fr test_dir/samhain_test + mv /etc/samhainrc_bak /etc/samhainrc + exit +fi + +sleep 2 + +if cat /var/log/samhain_log | grep "path=, size_old=<0>, size_new=<5>" +then + echo " -> $test: TEST-PASS" +else + echo " -> $test: TEST-FAIL" +fi + +rm -fr test_dir/samhain_test +mv /etc/samhainrc_bak /etc/samhainrc diff --git a/engine/tests/Functional.samhain/tests/samhain_help.sh b/engine/tests/Functional.samhain/tests/samhain_help.sh new file mode 100644 index 0000000..f16b680 --- /dev/null +++ b/engine/tests/Functional.samhain/tests/samhain_help.sh @@ -0,0 +1,13 @@ +#!/bin/sh + +# In target, run command samhain. +# option: --help + +test="help" + +if samhain --help | grep "Usage" +then + echo " -> $test: TEST-PASS" +else + echo " -> $test: TEST-FAIL" +fi diff --git a/engine/tests/Functional.samhain/tests/samhain_init.sh b/engine/tests/Functional.samhain/tests/samhain_init.sh new file mode 100644 index 0000000..64a2f17 --- /dev/null +++ b/engine/tests/Functional.samhain/tests/samhain_init.sh @@ -0,0 +1,42 @@ +#!/bin/sh + +# In target, run command samhain. +# option: -t + +test="init" + +umount /media/sda2 > /dev/null 2>&1 +umount /media/sda3 > /dev/null 2>&1 +umount /media/sda4 > /dev/null 2>&1 +umount /media/sda5 > /dev/null 2>&1 +umount /media/sda6 > /dev/null 2>&1 +umount /media/sda7 > /dev/null 2>&1 +umount /media/sda8 > /dev/null 2>&1 +umount /media/sda9 > /dev/null 2>&1 + +mv /etc/samhainrc /etc/samhainrc_bak +cp data/samhainrc /etc/samhainrc + +chown root.root /etc/samhainrc + +rm -fr /var/samhain/* +rm -f /var/log/samhain_log + +sleep 1 + +mkdir -p test_dir/samhain_test/ +touch test_dir/samhain_test/test.txt + +samhain -t init -p info > /dev/null 2&> 1 + +sleep 1 + +if cat /var/log/samhain_log | grep "ALRT.*-.*-.*T.*:.*:.*msg=\"EXIT\"" +then + echo " -> $test: TEST-PASS" +else + echo " -> $test: TEST-FAIL" +fi + +rm -fr test_dir/samhain_test +mv /etc/samhainrc_bak /etc/samhainrc -- 1.8.3.1